[5CA-OP] Composite Materials and Adhesion | International Symposium on Wood Science and Technology 2025

Advanced Search

Session Details

Composite Materials and Adhesion

[5CA-OP]Composite Materials and Adhesion

Tue. Mar 18, 2025 1:30 PM - 5:45 PM JST
Tue. Mar 18, 2025 4:30 AM - 8:45 AM UTC

ISWST 5 (Room 4-A)(Exhibition Bldg.)

1:30 PM - 1:45 PM JST(4:30 AM - 4:45 AM UTC)

[5CA-OP-01]Effect of ionic liquid [emim][OAc] on the set recovery behavior of densified wood

○Shiying Zhang¹ (1. Aalto University (Finland))

1:45 PM - 2:00 PM JST(4:45 AM - 5:00 AM UTC)

[5CA-OP-02]Direct dissolution of lignocellulosic biomass and preparation of high-performance all-biomass films

○Lifeng Yan¹, Long Zhang¹ (1. University of Science and Technology of China (China))

2:00 PM - 2:15 PM JST(5:00 AM - 5:15 AM UTC)

[5CA-OP-03]Crosslinking of Hardwood Kraft Lignin as Bio-Based Adhesives for Wood Bonding

○Byung-Dae Park¹, Ghahri Saman¹, Eko Setio Wibowo² (1. Kyungpook National University (Korea), 2. National Research and Innovation (BRIN) (Indonesia))

2:15 PM - 2:25 PM JST(5:15 AM - 5:25 AM UTC)

Break

2:25 PM - 2:40 PM JST(5:25 AM - 5:40 AM UTC)

[5CA-OP-04]Amphoteric modification and nanofibrillation of cellulose and its functional composites

○Yimin Fan¹, Juan Yu¹, Liang Liu¹, Lili Zhang¹, Zhiguo Wang¹ (1. Nanjing Forestry University (China))

2:40 PM - 2:55 PM JST(5:40 AM - 5:55 AM UTC)

[5CA-OP-05]Optical and mechanical properties of CNF/PMMA composite plate prepared from a Pickering emulsion

○Miyako Maruo¹, Tsuguyuki Saito¹, Shuji Fujisawa¹ (1. The University of Tokyo (Japan))

2:55 PM - 3:10 PM JST(5:55 AM - 6:10 AM UTC)

[5CA-OP-06]Preparation and properties of liquefied spent coffee ground-based waterborne polyurethane resin for wood protection

○Yi-Chun Chen¹, Jia-Lin Hsueh¹ (1. National Chung Hsing University (Taiwan))

3:10 PM - 3:35 PM JST(6:10 AM - 6:35 AM UTC)

Break

3:35 PM - 3:50 PM JST(6:35 AM - 6:50 AM UTC)

[5CA-OP-07]Integration of wood-based nanocellulose into a biopolymer matrix to improve mechanical properties of the bio-based composite

Ida Poljanšek¹, Urša Osolnik¹, Vesna Žepič Bogataj², Viljem Vek¹, ○Primož Oven¹ (1. University of Ljubljana, Biotechnical faculty (Slovenia), 2. TECOS (Slovenia))

3:50 PM - 4:05 PM JST(6:50 AM - 7:05 AM UTC)

[5CA-OP-08]Effects of addition of CNF (cellulose nano fiber) on the decomposition of biodegradable plastics, PBS

○Kazuko Ono¹, Hiroki Noguchi², Takeshi Senba², Hiroyuki Yano¹ (1. Kyoto University (Japan), 2. Kyoto Municipal Institute of Industrial Technology and Culture (Japan))

4:05 PM - 4:20 PM JST(7:05 AM - 7:20 AM UTC)

[5CA-OP-09]Optimizing the Mechanical Properties of Masterbatch-based Nanocellulose/ABS Composites via interfacial modification

○Yuanting YANG¹, Tsuguyuki Saito¹, Shuji Fujisawa¹ (1. The University of Tokyo (Japan))

4:20 PM - 4:35 PM JST(7:20 AM - 7:35 AM UTC)

[5CA-OP-10]Compressive strength of hybrid composites from mycelia and wood by-products

○Marta CORTINA ESCRIBANO¹, Aitor Barbero López², Jari Miina¹, Antti Haapala², Henri Vanhanen¹ (1. Natural Resources Institute Finland (Finland), 2. Department of Chemistry and Sustainable Technology (Finland))

4:35 PM - 4:45 PM JST(7:35 AM - 7:45 AM UTC)

Break

4:45 PM - 5:00 PM JST(7:45 AM - 8:00 AM UTC)

[5CA-OP-11]The physical properties of porous nanocellulose/polymer composites produced via w/o emulsion templating

○Kota Hasunuma¹, Naoki Tamura¹, Ken Okada², Katsunori Kimoto², Noriyuki Isobe², Tsuguyuki Saito¹, Shuji Fujisawa¹ (1. The University of Tokyo (Japan), 2. JAMSTEC (Japan))

5:00 PM - 5:15 PM JST(8:00 AM - 8:15 AM UTC)

[5CA-OP-12]Ultrasonic joining of carbon-reinforced polyamide with beech wood for manufacturing sustainable lightweight structures

Awais Awan¹, Gean Henrique Marcatto De Oliveira¹, Peter Auer¹, ○Josef Domitner¹, Sergio Traglia Amancio-Filho¹ (1. Graz University of Technology (Austria))

5:15 PM - 5:30 PM JST(8:15 AM - 8:30 AM UTC)

[5CA-OP-13]Material properties and application development of phosphorylated cellulose nanofibers

○Koh Sakai¹ (1. Oji Holdings Corporation (Japan))

5:30 PM - 5:45 PM JST(8:30 AM - 8:45 AM UTC)

[5CA-OP-14]Rapid Prediction of Cellulose Nanofiber Specific Surface Area Using Sedimentation Tests and Machine Learning, and Its Application to Composite Material Property Estimation

○Koyuru Nakayama¹, Keita Sakakibara¹ (1. National Institute of Advanced Industrial Science and Technology (Japan))

Back to Category List