Sessions(by Program Type)

LPM Oral Presentation

LPM 1: Process Monitoring and Control

Tue. Jun 10, 2025 1:30 PM - 2:50 PM JST
Tue. Jun 10, 2025 4:30 AM - 5:50 AM UTC
Room 1(4F)
Chair:Satoshi Hasegawa(Utsunomiya University, Japan)

LPM 2: Advanced Laser Processing

Tue. Jun 10, 2025 1:30 PM - 2:50 PM JST
Tue. Jun 10, 2025 4:30 AM - 5:50 AM UTC
Room 2(4F)
Chair:Shane Eaton(Department of Physics, Politecnico di Milano, Italy)

LPM 5: Fundamentals of Laser-materials Interactions

Tue. Jun 10, 2025 3:20 PM - 5:30 PM JST
Tue. Jun 10, 2025 6:20 AM - 8:30 AM UTC
Room 2(4F)
Chair:Ravi Bhardwaj(University of Ottawa, Canada), Juozas Dudutis(Center for Physical Sciences and Technology (FTMC), Lithuania)

LPM 10: Laser-based Direct-write Techniques

Wed. Jun 11, 2025 2:00 PM - 3:40 PM JST
Wed. Jun 11, 2025 5:00 AM - 6:40 AM UTC
Room 1(4F)
Chair:Christos Boutopoulos(Department of Ophthalmology, Faculty of Medicine, University of Montreal, Canada)

LPM 11: Beam Shaping

Wed. Jun 11, 2025 2:00 PM - 3:30 PM JST
Wed. Jun 11, 2025 5:00 AM - 6:30 AM UTC
Room 2(4F)
Chair:Martí Duocastella(Universitat de Barcelona, Spain)

LPM 13: Micro-welding and Micro-bonding

Wed. Jun 11, 2025 4:00 PM - 5:20 PM JST
Wed. Jun 11, 2025 7:00 AM - 8:20 AM UTC
Room 1(4F)
Chair:Keisuke Takenaka(Joining and Welding Research Institute, Osaka University, Japan)

LPM 14: Laser Drilling and Cutting 1

Wed. Jun 11, 2025 4:00 PM - 5:40 PM JST
Wed. Jun 11, 2025 7:00 AM - 8:40 AM UTC
Room 2(4F)
Chair:Camilo Florian Baron(University of Kassel, Germany)

LPM 16: Burst Ablation

Thu. Jun 12, 2025 8:30 AM - 10:10 AM JST
Thu. Jun 12, 2025 11:30 PM - 1:10 AM UTC
Room 1(4F)
Chair:Evgeny Gurevich(University of Applied Science FH Münster, Germany)

LPM 17: Laser Drilling and Cutting 2

Thu. Jun 12, 2025 8:30 AM - 10:10 AM JST
Thu. Jun 12, 2025 11:30 PM - 1:10 AM UTC
Room 2(4F)
Chair:Xiaohan Du(City University of Hong Kong, Hong Kong)

LPM 18: 3-D Micro- and Nano-fabrication

Thu. Jun 12, 2025 8:30 AM - 10:10 AM JST
Thu. Jun 12, 2025 11:30 PM - 1:10 AM UTC
Room 3(4F)
Chair:Shoji Maruo(Yokohama National University, Japan)

LPM 19: LIPSS & Surface Nanostructuring

Thu. Jun 12, 2025 10:30 AM - 12:10 PM JST
Thu. Jun 12, 2025 1:30 AM - 3:10 AM UTC
Room 1(4F)
Chair:Yves Bellouard(École Polytechnique Fédérale de Lausanne, Switzerland)

LPM 20: Ultrafast Metal Processing

Thu. Jun 12, 2025 10:40 AM - 12:10 PM JST
Thu. Jun 12, 2025 1:40 AM - 3:10 AM UTC
Room 2(4F)
Chair:Yuichi Kozawa(Tohoku University, Japan)
36 results ( 1 - 20 )
  • 1