Session Details

[2P01-49]Poster Session 2

Tue. Jul 22, 2025 4:30 PM - 6:00 PM JST
Tue. Jul 22, 2025 7:30 AM - 9:00 AM UTC
Poster (401 & 402)
Poster Session 2

[2P01]The Influence of Thermal and Flow Fields on the Process of Two-Dimensional Materials in Furnace

*Hua-Lin Chen1,2 (1. Taiwan Instrument Research Institute (Taiwan), 2. National Yang Ming Chiao Tung University (Taiwan))

[2P02]Enhanced Flow-Induced Crystallization of Poly(Lactic Acid) by Addition of Ethylene-Vinyl Acetate Copolymer

*Ruiqi Feng1, Masayuki Yamaguchi1 (1. Japan Advanced Institute of Science and Technology (Japan))

[2P03]Melt Memory Effect in Isotactic Polypropylene Films Produced with Shear Histories

*GUOJUAN XU1, Masayuki Yamagichi1 (1. Japan Advanced Insititute of Science and Technology (Japan))

[2P04]Structural Growth of Poly(lactic acid) Blends during Post-process Annealing

*Hoang-Giang Dai Vo1, Masayuki Yamaguchi1 (1. Graduate School of Advanced Science and Technology, Japan Advanced Institute of Science and Technology (Japan))

[2P05]Sharp Corner Singularity of the White--Metzner Model

*Christian Alexander Jones1, Jonathan Evans1 (1. University of Bath (UK))

[2P06]Effect of solvent viscosity on extensional properties of PEO solutions using piezo-driven extensional rheometry

*Takeshi Matsuda1,2, Masakazu Muto2, Shinji Tamano2 (1. SCREEN holdings co., Ltd. (Japan), 2. Nagoya Institute of Technology, (Japan))

[2P07]A new measurement method of fiber length of cellulose nanofiber using simple shear flow

*Kazunori Yasuda1, Shunsuke Kawamata1, Tatsuhiro Honda1 (1. Ehime University (Japan))

[2P08]Numerical simulation of extensional jetting behavior of viscoelastic fluids ejected by DOD

*Haruki Ishikawa1, Masakazu Muto1, Shinji Tamano1 (1. Nagoya Institute of Technology (Japan))

[2P09]Orientation and Rheological Properties of Rigid Cylindrical Fibers in Strongly Viscoelastic Fluids

*Wenqing Zheng1, Yuji Tasaka1, Yuichi Murai1 (1. Hokkaido university (Japan))

[2P10]Relationship between drag-reducing effect and rheological properties of a synthesized plant-derived surfactant

*Aya Kaide1, Takafumi Tatsukawa, Takashi Saeki1 (1. Yamaguchi Univ. (Japan))

[2P11]Research on birefringence measurement of CTAB/NaSal solutions under uniaxial extension-induced structure

*Naoki Kako1, Masakazu Muto1, Shinji Tamano1 (1. Nagoya Institute of Technology (Japan))

[2P12]Linear and Nonlinear Rheological Study of PEG/α-CD Polyrotaxane Solution

*Yi Huang1,2,3,4, Yu Zhu1,2,3,4, Lin Cheng1,2,3,4, Wei Yu1,2,3,4 (1. Shanghai Jiao Tong University (China), 2. School of Chemistry and Chemical Engineering (China), 3. Department of Polymer Science and Engineering (China), 4. Advanced Rheology Institute (China))

[2P13]Unexpected gelation behavior in polymerization-induced self-assembly

*Ibuki Shibata1, Ayae Sugawara-Narutaki2, Rintaro Takahashi3 (1. Grad. of Eng. Nagoya Univ. (Japan), 2. Institute of Science Tokyo (Japan), 3. Grad. of Sci. Osaka Univ. (Japan))

[2P14]The packing structures of side chain methylene in polymers: ordered and disordered packing

*Wen-Rui Zhu1, Cong-Cong Huang1, Chen-Yang Liu1 (1. ICCAS (China))

[2P15]Influences of Phase-Separated Structure on Yield Deformation Behavior in Thermoplastic Polyamide Elastomer

*Yuta Kuwabara1, Takumitsu Kida1, Hiroki Takeshita1, Katsuhisa Tokumitsu1 (1. The University of Shiga Prefecture (Japan))

[2P16]Rheological Behavior of Polystyrene Composite with Fumed Silica Having Different Particle Properties

Momona Fukuura1, Risako Ikeda1, *Naoya Torikai1 (1. Mie University (Japan))

[2P17]Supersonic Fracture in Elastomer with Finite Element Simulation

*Hokuto Nagatakiya1, Naoyuki Sakumichi2, Shunsuke Kobayashi1, Ryuichi Tarumi1 (1. University of Osaka (Japan), 2. University of Tokyo (Japan))

[2P18]Study on the Physical Properties of Poly(N-isopropylacrylamide) Single Chain Using Nanofishing Method

*Haruka Mori1, Shiho Tanizaki1, Xiaobin Liang1, Kotaro Satoh1, Ken Nakajima1 (1. Dept. of Chemical Science and Engineering, Science Tokyo (Japan))

[2P19]Polyethylene-based Elastomer for Impact Modification of Polypropylene

*Shi-Rong Wang1, Bao-Qing Zhang1, Xin Qiao1, Chen-Yang Liu1, Wen-Hua Sun1 (1. ICCAS (China))

[2P20]Characterization of shear thinning in polymer melts by molecular geometry

*Yuhi Sakamaki1, Shota Goto1, Kang Kim1, Nobuyuki Matsubayashi1 (1. Osaka University, Graduate School of Engineering Science (Japan))

[2P22]Linear Viscoelasticity and Birefringence of Cellulose Nanofiber Suspensions

*Atsushi Matsumoto1, Himari Taniguchi1, Reina Tanaka3, Etsuko Ozawa2, Tadashi Inoue2, Shinji Sugihara1, Yasushi Maeda1 (1. University of Fukui (Japan), 2. Osaka University (Japan), 3. Forestry and Forest Products Research Institute (Japan))

[2P23]Rheo-Optical Analysis on the Shear Flow for Cellulose Nanofiber Suspensions

*Atsushi Matsumoto1, Himari Taniguchi1, Reina Tanaka2, Taisuke Sato3, Shinji Sugihara1, Yasushi Maeda1 (1. University of Fukui (Japan), 2. Forestry and Forest Products Research Institute (Japan), 3. Photron Ltd. (Japan))

[2P24]Rheological Behavior of Agar Microgel / Hydrophobically modified ethoxylated urethane Mixture system

*Ayano Nakamura1,2, Koichi Fujii1, Akio Nasu1, Tadashi Inoue2 (1. Shiseido Co., Ltd., MIRAI Technology Institute (Japan), 2. Department of Macromolecular Science, Graduate School of Science, Osaka University (Japan))

[2P25]Rheo-Optical Behavior of Silica/PEO/Water Shake Gel

*Yoshifumi Yamagata1, Moe Araida1, Taisuke Sato2, Shunsuke Sato3, Motoyoshi Kobayashi3 (1. Anton Paar Japan (Japan), 2. Photonic Lattice (Japan), 3. Univ. of Tsukuba (Japan))

[2P26]Rheo-Optics measurement on cellulose nanofiber dispersions defibrillated by the water jet method

*Moe Araida1, Yoshifumi Yamagata1, Taisuke Sato2, Takuya Katashima3 (1. Anton Paar Japan K.K. (Japan), 2. Photonic Lattice.inc (Japan), 3. Graduate School of Engineering, The University of Tokyo (Japan))

[2P27]Mesoscale Evolution of Gel Structures in Laponite Suspensions

*Shunichi Saito1, Sooyeon Kim2, Yuichi Taniguchi2, Miho Yanagisawa1 (1. University of Tokyo (Japan), 2. Kyoto University (Japan))

[2P28]Stability Evaluation of Cathode Slurry for Lithium-Ion Batteries Using an Oscillation Viscometer

*Kotaro Fujita1, Yoshiyuki Komoda1, Naoto Ohmura1 (1. Kobe Univ. (Japan))

[2P29]Evaluation of the Internal Structure of Aqueous Dense Slurry of Conductive Additives for Lithium-ion Batteries

*Ryusei Soyama1, Yoshiyuki Komoda1, Naoto Ohmura1, Hisayuki Ishida2, Akiyoshi Nishikawa2 (1. Kobe University (Japan), 2. DKS Corporation (Japan))

[2P30]Theoretical Analysis of Induced Fluxes in Reverse Nonequilibrium Molecular Dynamics Simulations

*Takashi Uneyama1, Tatsuma Oishi1, Yusuke Koide1, Takato Ishida1, Yuichi Masubuchi1 (1. Nagoya University (Japan))

[2P32]Predicting printability in 3D food printing: Insights from yielding behavior of edible ink formulation

*Nathaniel Hendrik1,2, Thekla Alpers2, Thomas Becker2 (1. TUMCREATE (Singapore), 2. Technical University of Munich, Chair of Brewing and Beverage Technology, Research Group Cereal Technology and Process Engineering (Germany))

[2P33]Accelerating Food Product Formulation Development with DWS Microrheology

Joelle Medinger1, *Gaurasundar Marc Conley1, Ian Block1 (1. LS Instruments (Switzerland))

[2P34]Correlating Rheological Properties of Complex Food Liquids with Pressure Drop in Processing Systems

*Cynthia Andriani1,4, Ayupry Diptasari1, Dragana Arlov2, Jannika Timander3, Fredrik Innings1,3, Björn Bergenståhl1 (1. Lund University (Sweden), 2. Tetra Pak Processing Systems AB (Sweden), 3. Tetra Pak Packaging Solutions AB (Sweden), 4. University of Auckland (New Zealand))

[2P35]Imaging the Development of Internal Damage
Induced by Nonuniform Deformation in Nanocomposite Soft Materials

*Yuki Tokudome1, Thanh-Tam Mai1, Kenji Urayama1 (1. Kyoto Univ. (Japan))

[2P36]Evolution of Fingerprint Texture in Cholesteric Liquid Crystal Elastomers during Stretching

*Koudai Tanino1, Kenji Urayama1 (1. Department of Material Chemistry, Kyoto University, Kyoto, Japan (Japan))

[2P37]Self-assembly porphyrin-based/alginate hydrogel for photocatalytic seawater splitting

*Yihsueh Chen1, Jrjeng Ruan1, Masayuki Yamaguchi2 (1. National Cheng Kung University (Taiwan), 2. Japan Advanced Institute of Science and Technology (Japan))

[2P38]Verification of viscoelastic contact mechanics with a fractional viscoelastic model

*Kanon Hasegawa1, Makiko Ito1, Xiaobin Liang1, Ken Nakajima1 (1. School of Materials and Chemical Technology, Institute of Science Tokyo (Japan))

[2P39]Viscoelastic Properties of Natural Rubber and Styrene-butadiene Rubber under High-pressure CO2

*Shin-ichi Kihara1, Takumi Maekawa1, Gaku Inoue1 (1. Hiroshima Univ. (Japan))

[2P40]Rheological study of topology-transformable macromolecular [2]rotaxanes

*Yu Zhu1, Yi Huang1, Lin Cheng1, Wei Yu1 (1. School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University (China))

[2P41]Swelling Behavior and Ionic Conductivity for Polymerized Ionic-Liquid-Based Gels

*Haruki Izutsu1, Osamu Urakawa1, Tadashi Inoue1 (1. Osaka Univ. (Japan))

[2P42]Longitudinal wave emission during crack propagation in polymer gels

*Mitsuki Nagaura1, Naoyuki Sakumichi1, Takamasa Sakai1 (1. Department of chemistry and biotechnology, The University of Tokyo (Japan))

[2P43]Precise determination of the gel point and critical exponents in end-linking semi-dilute star polymer solutions

*Haruto Omori1, Mitsuki Nagaura1, Naoyuki Sakumichi1, Takamasa Sakai1 (1. Department of chemistry and biotechnology, the University of Tokyo (Japan))

[2P44]Charge-Regulated Conformational Transitions Govern Polyelectrolyte Droplet Instabilities

*Zihao Dong1, Hongyi Zou1, Ruoyu Dong1 (1. Beihang University (China))

[2P45]Effects of colloidal rods on the pinch-off of viscoelastic polymer solutions

*Hongyi Zou1, Zihao Dong1, Ruoyu Dong1 (1. Beihang University (China))

[2P46]Establishing highly reliable characterization methods for rheological curing behavior of epoxy molding compounds

*Seongho Kim1, Youngho Eom1 (1. Department of Organic and Nano Engineering, Human-Tech Convergence Program, Hanyang University (Korea))

[2P47]Rheological and structural design of fiber-reinforced ceramic blocks with enhanced heat-dissipating properties

*Hyeseo Choi1, Minji Kim2, Hyunji Kim2, Youngho Eom2 (1. Department of Semiconductor Engineering, Hanyang University (Korea), 2. Department of Organic and Nano Engineering, Human-Tech Convergence Program, Hanyang University (Korea))

[2P48]Development of large-area mycelium sheet through rheological design: application for automotive interiors

*Hyo Jeong Kim1, Yunho Jeong1, Jae Wang Ko2, Il-Jin Kim2, Youngho Eom1 (1. Department of Organic and Nano Engineering, Human-Tech Convergence Program, Hanyang University (Korea), 2. Korea Institute of footwear & Leather Technology (KIFLT) (Korea))

[2P49]Degradation Mechanisms of Polypropylene Composites Under Accelerated Aging

Daeyul Kwon1, Jeehoon Yu1, *Youngjae Yoo1 (1. Chung-Ang University (Korea))