Session Details
[P3-1vn]Poster
Tue. Mar 17, 2026 3:55 PM - 5:25 PM JST
Tue. Mar 17, 2026 6:55 AM - 8:25 AM UTC
Tue. Mar 17, 2026 6:55 AM - 8:25 AM UTC
Poster Site-3 (Arena, Sports Hall [1F])
[P3-1vn-01]Na-Insertion/Extraction Properties of Anode Using Spherical Mesoporous Rutile TiNbO4 for Sodium-Ion Batteries
○Natsuki Ikemoto1,3, Hiroyuki Usui2,3, Yasuhiro Domi2,3, Toshiyuki Tanaka4, Hiroki Sakaguchi2,3 (1. Graduate School of Sustainability Science, Tottori Univ., 2. Graduate School of Engineering, Tottori Univ., 3. Center for Research on GSC, Tottori Univ., 4. Mechanical and Material Research Laboratory, Tottori Institute of Industrial Technology)
[P3-1vn-02]Exploration of Mg-Fe-Si-O-Based Cathode Materials Using Microwave-Assisted Solvothermal Method
○Fumihiko Ichihara1, Keigo Kubota1, Toshikatsu Kojima1, Naoya Ishida1 (1. National Institute of Advanced Industrial Science and Technology)
[P3-1vn-03]Effect of Synthesis Condition Control on the Appearance of Potential Properties in MgV2O4 Cathode Materials
○Naoya Ishida1, Keigo Kubota1, Toshikatsu Kojima1, Fumihiko Ichihara1, Shin Kiyohara2, Yu Kumagai2 (1. AIST, 2. Tohoku Univ.)
[P3-1vn-04]Electrolyte Performance of Ionic Liquid for Magnesium Secondary Battery at Intermediate Temperature
○Keigo Kubota1, Naoya Ishida1 (1. Advanced Industrial Science and Technology)
[P3-1vn-05]Catalysts and Fuel Cells for the Oxidation of Formic Acid and Formate
○Kohei Yamamoto1, Yuto Shimoyama1, Fumiaki Amano1 (1. Tokyo Metropolitan University)
[P3-1vn-06]Fabrication of multi-element-doped hematite photoelectrodes via a highly reproducible protocol and machine-learning-based performance prediction
○Yoshitaka Kumabe1,2, Takuma Nishimura2, Yosuke Harashima3,4, Mikiya Fujii3,4,5, Takashi Tachikawa1,2 (1. Mol. Photosci. Res. Center, Kobe Univ., 2. Grad. Sch. of Sci., Kobe Univ., 3. MS, NAIST, 4. DSC, NAIST, 5. CMP, NAIST)
[P3-1vn-07]Development of a 3-in-1 Zinc–Air Battery Using Wood-Derived Laser-Induced Graphene Electrodes
○Riku Miyajima1, Anon Minoda2, Kosuke ino3, Hitoshi Shiku3, Hiroya Abe2,3 (1. Sch. Eng., Tohoku Univ., 2. FRIS, Tohoku Univ., 3. Grad. Sch. Eng., Tohoku Univ.)
[P3-1vn-08]Sustainable Asphalt Rejuvenation Using Bio-Based Functional Material C-AG: Design and Application
○Rika Iwaura1, Kohei Hosokawa2, Hideki Kanezako2, Yoshihiro Kikkawa3, Reiko Shimane1 (1. NARO, 2. Nanao Kogyo Co., Ltd., 3. AIST)
[P3-1vn-09]Two-Step Chemical Recycling of Used Tire Rubber
○Yoshihiro Ueda1, Wahyu Satpriyo Putro1, Hiroshi Yamashita1, Masahiro Hojo2, Seiichi Tahara2, Masahiro Homma2, Takakazu Minato2, Kazuhiro Matsumoto1, Jun-Chul Choi1, Norihisa Fukaya1 (1. AIST, 2. Bridgestone Corp.)
[P3-1vn-10]Carboxylative cyclization using solid CO2 sources
○Akira Fujii1, Ryuki Baba1 (1. Industrial Technology Center of Wakayama Prefecture)
[P3-1vn-11]Photothermal conversion with transition metal doped limestone
○Kenji Saito1, Ayumu Eguchi1, Keisuke Hisamichi1 (1. Niigata University)
[P3-1vn-12]Photoinduced crystalline solid-liquid transitions of polymers by thermally bistable molecular photoswitches and their adhesive applications
○Naoki Kaneda1, Keiichi Imato1, Yousuke Ooyama1 (1. Hiroshima University)
[P3-1vn-13]Complete mineralization of polychlorotrifluoroethylene (PCTFE) by mechanochemical approach
○Shion Okadome1, Hisao Hori1 (1. Kanagawa University)
[P3-1vn-14]Foam separation of hexavalent chromium using cationic gemini surfactants and elucidation of the separation mechanism
○Yosei Fukuzawa1, Yukishige Kondo1, Shiho Yada1 (1. Tokyo Univ. of Sci.)
[P3-1vn-15]Investigation of Preliminary Technique for Confirm Cavities in Biodegradable Hollow Polymer Microparticles
○Nozomu Yasui1, Ukyo Saito2, Tsuyoshi Yamaguchi2, Yoshihiro Kojima3, Keiji Yasuda2 (1. Nagoya Municipal Industrial Research Institute, 2. Graduate School of Engineering, Nagoya University, 3. Institute of Materials and Systems for Sustainability, Nagoya University)
[P3-1vn-16]Effect of Cooling Temperature on CO2 Adsorption Capacity of MOFs with Graphene Oxide Additives
○Hajime Shingai1, Isao Yoshikawa2, Hirohiko Houjou2,3, Katsunori Iwase1 (1. DENSO CORPORATION, 2. Institute of Industrial Science, The University of Tokyo, 3. Environmental Science Center, The University ofTokyo)
[P3-1vn-17]Simulation of gas adsorption behavior in microporous metal-organic frameworks for energy storage and conversion applications
○Tomoyuki Umeyama1, Joonsik Kim1, Yuki Wada1, Pavel Usov1, Takaya Matsumoto1,2, Masaki Kawano1 (1. Department of Chemistry, School of Science, Institute of Science Tokyo, 2. Central Technical Research Laboratory, ENEOS Corporation)
[P3-1vn-18]Electrodialysis of Formate Solutions to Formic Acid
○Ken Takanashi1, Yuto Shimoyama1, Fumiaki Amano1 (1. Tokyo Metropolitan University)
[P3-1vn-19]Desiccation tolerance of Acinetobacter as a promising chassis for gas-phase bioprocesses
○Shogo Yoshimoto1, Hayata Yamada1, Shori Inoue1, Katsutoshi Hori1 (1. Nagoya University)
[P3-1vn-20]Separation and Purification of High-Purity Ammonia Gas from Ammonium Carbonate Salts
○Hitomi Ohmagari1, Masami Kawakami1, Hatsuho Usuda1, Hisashi Tanaka1, Tohru Kawamoto1, Kimitaka Minami1 (1. AIST)
[P3-1vn-21]Development and Structural/Interfacial Characterization of Sustainable Bio-Based Amino Acid–Sugar Hybrid Surfactants for Applications in Detergents and Cosmetics
○Fuka Takami1, Goro Hashimoto2, Chika Nakane3, Kentaro Teramoto3, Takashi Oomori3, Risa Kawai1, Tomokazu Yoshimura1 (1. Grad. Sch. Human. Sci., Nara Women's Univ., 2. Toho Chemical Industry Co., Ltd., 3. Matsumoto Trading Co., Ltd.)
[P3-1vn-22]Development of self-healable and recyclable optical resins
○Yoshiaki Yoshida1,2,3, Tsubasa Sakiyama1, Ririka Ota1 (1. Kyutech, 2. GMRC, Kyutech, 3. JST PRESTO)
[P3-1vn-23]Functional group transformations from carbonyl compounds by using nitrogen-introduction reagents
○Kengo Hyodo1 (1. Kindai University)
[P3-1vn-24]Development of an Efficient Ester Reduction Method Using NaBH4 in Toluene
○Mayu Ishida1, Reito Endo1, Mizuki Nakagawa1, Toshinobu Korenaga1 (1. Iwate Univ.)
[P3-1vn-25]Palladium-Catalyzed Hydroxyalkylation of Organoboron Compounds
Yuta Matsumoto1, Rin Hieda1, ○Tetsuya Yamamoto1 (1. Tokyo Denki Univ.)
[P3-1vn-26]Creation of chiral-molecule-intercalated TiSe2 aimed at realizing fully spin-polarized materials and superconducting diode applications
○Yukito Okuda1, Koki Yanagizawa2, Katsuaki Sugawara2, Koji Segawa3, Takafumi Sato2, Shu Seki1, Masayuki Suda4 (1. Graduate School of Engineering, Kyoto University, 2. Graduate School of Science, Tohoku University, 3. Graduate School of Science, Kyoto Sangyo University, 4. Graduate School of Science, Nagoya University)
[P3-1vn-27]Post-modification of poly(ethylene glycol) for gel synthesis and its application in Pd-immobilized catalysts
○Yuji Sakai1, Shogo Mori2, Kentaro Fuku1,3, Mineto Uchiyama4, Mizuki Tada1,3, Masami Kamigaito4, Naoya Torikai5, Susumu Saito1,2 (1. Grad. Sch. Sci., Nagoya Univ., 2. IRCCS, Nagoya Univ., 3. RCMS, Nagoya Univ., 4. Grad. Sch. Eng., Nagoya Univ., 5. Grad. Sch. Eng., Mie Univ.)
[P3-1vn-28]Development and Application of a Silicon Film Chamber Aimed at Improving X-ray Analytical Accuracy
○Tsuyoshi Yoda1, Kazuhiko Yokohama1 (1. Aomori Prefectural Industrial Technology Research Center)
[P3-1vn-29]Multiple and Single-Molecule White-Light Emissions from Small and Simple Perylenequinone Skeleton
○Shogo Amimoto1, Keiichi Imato1, Naoki Kaneda1, Yousuke Ooyama1 (1. Hiroshima University)
[P3-1vn-30]Triplet-Triplet Annihilation Upconversion Using Novel Diphenylanthracene-based Amorphous Molecular Fluorophores
○Koki Soida1, Shungo Naemura1, Hideyuki Nakano1 (1. Muroran Institute of Technology)
[P3-1vn-31]Upconversion Circularly Polarized Luminescence from Lanthanide-Doped TbPO4 Nanocrystals
○Keigo Nitahara1, Takeru KONTA1, Hiroyasu NISHIGUCHI1, Emi HIFUMI1, Yasushi OHGA1, Toru TAKAHASHI1, Takunori HARADA1 (1. Oita University)
[P3-1vn-32]Asymmetric Mechanical Behaviors of Chiral Organogels
○Sana Fujiki1, Motona Matsubara1, Hideyuki Nakano1 (1. Muroran Institute of Technology)
[P3-1vn-33]Supramolecular Polymerozation of Cyclic Phenolic Resins and Induction of Circular Dichroism
○Shuhei Koike1, Takuya Matsumoto1, Toyoko Suzuki1, Hideto Minami1, Nozomu Suzuki1 (1. Kobe Univ.)
[P3-1vn-34]Photomechanical Behaviors of Cyanostilbene-based Amorphous Molecular Fibers
○Shuto Hanagama1, Yuito Shimazaki, Hideyuki Nakano1 (1. Muroran Institute of Technology)
[P3-1vn-35]Toward Weak-Light Actuation and Visualization of a Photoreaction Intermediate: Dual Photo–Thermal Response Control in an Anthracene-Based Crystal
○Yuto Hino1, Takumi Matsuo2,3, Shotaro Hayashi2,3 (1. Graduate School of Engineering, Kochi University of Technology, 2. School of Engineering Science, Kochi University of Technology, 3. FOREST Center, Research Institute, Kochi University of Technology)
[P3-1vn-36]Orientational Order Formation of Amphiphilic Liquid Crystals with
Ammonium and Hydroxy Groups
○SAE HORITA1, YUKINO KAI2, KANOKO MIYAWAKI2, TAKESHI YOSHIMI1, SEIJI UJIIE1 (1. Oita University, 2. Graduate school of Oita University)
[P3-1vn-37]Anisotropic Structure and Orientational Order on (Polymer/Polar Molecule)Hydrogen-Bonded Composites
○Shunsuke Hirata1, Aya Isayama2, Takeshi Yoshimi1, Seiji Ujiie1 (1. Oita University., 2. Graduate school of Oita University.)
[P3-1vn-38]Adsorption Mechanism of Ionic Organic Dyes by Layered MnO2 with a Lipid Bilayer Structure
○soma Kataoka1, Masami Matsui1, Kazuaki Tomono1 (1. Kanto Gakuin Univ.)
[P3-1vn-39]Synthesis and Formation Mechanism of Micron-sized Monodisperse Poly(amic acid) Particles having Hollow Structure
○Yuki Oyone1, Mina Urakami1, Takeru Michiura2, Nagino Mori2, Shu Kikuchi3, Shinya Matsuno3, Takuya Matsumoto2, Nozomu Suzuki2, Toyoko Suzuki2, Hideto Minami2 (1. Fac. of Eng., Kobe Univ., 2. Grad. Sch. of Eng., Kobe Univ., 3. Sekisui Kasei Co., Ltd.)
[P3-1vn-40]The development of precise metal accumulation techniques using multicationic macromolecular capsules
○Ryotaro Sakamoto1, Takamasa Tsukamoto1,2,3 (1. Graduate School of Engineering, The University of Tokyo, 2. Institute of Industrial Science, The University of Tokyo, 3. JST FOREST)
[P3-1vn-41]Structural analysis of novel self-assembling peptide hydrogels by cryo-EM for static in-gel cultivation of bacteria
○Atsuya Yaguchi1,2, Tomomi Uchikubo1, Haruka Kawabata1, Tetsushi Mori2, Naito Ishimoto1, Takahiro Muraoka2, Sam-Yong Park1 (1. Yokohama City University, 2. Tokyo University of Agriculture and Technology)
[P3-1vn-42]Visible-light-induced internal pH control using Pt-supported hollow g-C3N4 particles
○Takashi Harada1, Kosuke Kimura1, Kazuhide Kamiya1, Shuji Nakanishi1 (1. The university of Osaka)
[P3-1vn-43]Development and Application of a Robotic Powder-Mixing System Based on Quantitative Characterization of Manual Mixing Motions
○Kazuki Ishizaki1, Shigeru Kobayashi1, Yoshinobu Nakamura1, Seita Fuchigami2, Keisuke Aoki2, Akinori Nagano2, Taro Hitosugi1 (1. The University of Tokyo, 2. SEKISUI CHEMICAL CO., LTD.)
[P3-1vn-44]Implementation of Automated High-Throughput Catalyst Preparation
○Kota Shinoku1, Kyo Yanagiyama1, Toshiaki Taniike1 (1. Japan Advanced Institute of Science and Technology)
[P3-1vn-45]Exploring Reaction Conditions Using an Automated Synthesis System
○Takuya Yamagata1, Keiya Aoyagi1, Kazushi Hayashi1, Munenori Inoue1 (1. SCRI)
[P3-1vn-46]Coordination of automated reactor system and machine learning for autonomous exploration of reaction condition
○Kazushi Hayashi1, Keiya Aoyagi1, Takuya Yamagata1, Inoue Munenori1 (1. SCRI)
[P3-1vn-47]Development of a Dynamic Experimental Logging and Supporting System Using Large Language Models and Knowledge Graphs
○Hinata Kadowaki1, Masahiko Nakano2,3, Junji Seino1,2 (1. School of Advanced Science and Engineering, Waseda University, 2. Waseda Research Institute for Science and Engineering, 3. SambaNova)
[P3-1vn-48]Design and Synthesis of Iodinated Contrast Agents with Dual Renal-Hepatic Excretion for Reduced Renal Burden
○Yumiko Suzuki1, Ryo Kubota1, Megumi Moriya1, Ritsuko Oikawa2, Towa Takahashi1, Shodai Abe1, Zack Lauren Willison1, Shinkoh Nanbu1, Nobuyuki Matsumoto2 (1. Sophia University, 2. St. Marianna University School of Medicine)
[P3-1vn-49]Design, Synthesis, and Evaluation of a Photoresponsive Paclitaxel Derivative for Local On/Off-Controlled Drug Delivery
○Tomoki Oishi1, Yuki Akagi1 (1. The Univ. of Agriculture and Technology)
[P3-1vn-50]Atomistic Peptide–MHC Stability Profiling for Rational Neoepitope Prioritization in Personalized Vaccine Design
○Jelang Muhammad Dirgantara1, Kazuma Kiyotani2, Takuto Nogimori3, Shokichi Takahama3, Takashi Morisaki4, Takuya Yamamoto3, Suyong Re1 (1. Laboratory of In Silico Design, Artificial Intelligence Center for Health and Biomedical Research, National Institutes of Biomedical Innovation, Health and Nutrition, Osaka, Japan, 2. Laboratory of Immunogenomics, Center for Intractable Diseases and ImmunoGenomics, National Institute of Biomedical Innovation, Health and Nutrition, Osaka, Japan., 3. Laboratory of Precision Immunology, Center for Intractable Diseases and ImmunoGenomics, National Institutes of Biomedical Innovation, Health and Nutrition, Osaka, Japan, 4. Fukuoka General Cancer Clinic)
[P3-1vn-51]Evaluation of radioresistance in the iridium (III) complex BTPDM1 as a hypoxia-sensing phosphorescent probe
○Hina Miyazaki1, Yukari Yoshida1, Toshitada Yoshihara2, Akihisa Takahashi1 (1. Division of Biology, Gunma University Heavy Ion Medical Center, 2. Department of Chemistry, Graduate School of Science and Technology, Gunma University)