Session Details

[FMCp1]Manufacturing, Materials and Components

Thu. Dec 4, 2025 2:30 PM - 3:50 PM JST
Thu. Dec 4, 2025 5:30 AM - 6:50 AM UTC
Conf. Management Room(Poster-2)

[2]Scratch Resistance Enhancement for Array Backplanes via Passivation Layer and Metal Wire Optimization

*Jie Zhang1, Yi Chuan Zhang1, Zhong Ming Song1, Xing Xing Tang1, Zhen Liu1, He Jing Zhang1, James Hsu1, Wade Chen1 (1. Chongqing HKC Optoelectronics Technology Co., Ltd. (China))
Comment()

[3]Advances in Sub-Micron Lithography for High-Resolution VR Display Manufacturing

*Yuta Mizutani1, Yusuke Isokawa, Takanobu Akiyama (1. Nikon Corporation (Japan))
Comment()

[4]Optimization of Transparent Material Mark Recognition for Liquid Crystal Display

*Wen Zhang Zhao1, Ming Wu1, Su Di Rao1, Yun Bo Li1, Wen Ping Yang1, Teng Hui He1, Cheng Yi Huang1, James Hsu1, Wade Chen1 (1. Changsha HKC Optoelectronics Technology Co., Ltd. (China))
Comment()

[5]Cause Analysis of Bubble Formation in TFT-LCD Products after High-Reliability Ball Drop Test

*Xianfei Zhu1, Zeyao Li1, Xiaowu Sun1, Xirong Han1, Tianhao Zhang1, Jianyu Cui1, Tian Lan1, Ying Ye1, Maokun Yang1, Minghong Shi1, Wade Chen1 (1. Chongqing HKC Optoelectronics Technology Co. Ltd. (China))
Comment()

[6]Research on Bubble at High-Temperature Storage Ball Drop of TFT-LCD

*Jinsong Lu1, Ranlong Wang1, Qin Xiong1, Dengli Yao1, Jianfeng Yang1, Kaijun Liu1, Jinn Hung1, James Hsu1, Wade Chen1 (1. Chongqing HKC Optoelectronics Technology Co., Ltd. (China))
Comment()

[7]Etch-Free Direct Patterning of Sol-gel CuxO/IGZO Heterojunctions for Ternary Logic Circuits

*Seokhyeon Baek1, Sungjun Park1 (1. Ajou University (Korea))
Comment()

[8]Influence of Inlet Configuration on Precursor and Thermal Uniformity in MOCVD Reactors

*Chehung Wei1, Long-Sheng Li1 (1. Tatung University (Taiwan))
Comment()

[9]Scalar Diffraction Study in Proximity Printing

*Minchul Sakong1, Jaewon Huh1, Musun Kwak1, Yuho Jung1, Sungjin Oh1, Youngseok Choi1 (1. LG Display Co., Ltd. (Korea))
Comment()

[10]Study on PID Control Parameter Optimization for Reducing Electric Energy Consumption in Oven Bake Equipment

*Jaewon Huh1, Musun Kwak1, Minchul Sakong1, Minwoo Park1, Yoonsun Kang1, Youngseok Choi1 (1. LG Display (Korea))
Comment()

[11]Tunable Mechanical and Optical Properties of Al-doped SiC-ON Thin Films Using Reactive Co-Sputtering at Room Temperature

*HyeonSeok Lee1, Jong-Hyun Jang1, Ju-Yong Kim1, Ye-Jin Shim1, Min-Seo Kim1, Han-Ki Kim1 (1. Sungkyunkwan University (Korea))
Comment()

[12]Per- and Polyfluoroalkyl Substance-Free Liquid-Repellent Black Bank for Inkjet-Printed Displays

*Junghwi Lee1, Masato Miyashita1, Shinya Oku1 (1. Tosoh Corporation (Japan))
Comment()

[13]PVG-Based Program for High-Speed Simulation System Optimization

*Liang Zhou1, Yishi Weng1, Yuning Zhang1, Ran Wei1, Canran Yang1, Yuchen Gu1, Chuang Wang1, Nan Lin1, Wanchen Zhang1, Baoping Wang1 (1. Southeast University (China))
Comment()

[14]Enhancement of Light Extraction in Micro-LEDs Using Curvature-Tuned Polymer Micro-lens Arrays via Nanoimprinting and Thermal Reflow

*Yerin Choi1, SeungJe Lee1, Gang Yeol Yoo1, Soo Jin Kim2, Hyun Min Cho1 (1. Korea Electronics Technology Institute (KETI) (Korea), 2. Korea University (Korea))
Comment()

[15]Effect of Draft Angle Deviation on Aerial Imaging Performance of Dihedral Corner Reflector Arrays

*Cheng-Yu Chang1, Chien-Yu Chen1, Tzu-An Chou1 (1. National Taiwan University of Science and Technology (Taiwan))
Comment()

[16]Spectrally Accurate Aerial Image Formation by Use of Three-Dimensional Objects as Light Sources

*Ryosuke Ichikawa1, Takehide Ikeda1, Shiro Suyama1, Hirotsugu Yamamoto1 (1. Utsunomiya University (Japan))
Comment()

[17]Proposal of a Non-Contact Size Measurement Method by Aligning the Aerial Images of Animals with Transparent Scale

*Aoba Makishima1, Ryosuke Ichikawa1, Takehide Ikeda1, Shiro Suyama1, Hirotsugu Yamamoto1 (1. Utsunomiya University (Japan))
Comment()

[19]Extension of Floating Distance and Magnification of Aerial Images in the AIRR Optical System by Use of a Convex Mirror

*Akito Fukuda Fukuda1, Sotaro Kaneko1, Kazuaki Takiyama1, Toru Iwane1, Shiro Suyama1, Hirotsugu Yamamoto1 (1. Utsunomiya University (Japan))
Comment()