Session Details

[22p-A306-1~22]17.1 Carbon nanotubes & other nanocarbon materials

Fri. Sep 22, 2023 1:00 PM - 6:45 PM JST
Fri. Sep 22, 2023 4:00 AM - 9:45 AM UTC
A306 (KJ Hall)
Takahide Oya(Yokohama Natl. Univ.), Yasuhiko Hayashi(Okayama Univ.)

[22p-A306-1]Properties of Clover-Flower-Like Carbon Prepared by RF Magnetron Sputtering

〇Yudai Tokito1, Yuta Sasaki2, Soichiro Koga2, Masami Aono1 (1.Graduate School of Science and Engineering, Kagoshima Univ., 2.Faculty of Engineering, Kagoshima Univ.)

[22p-A306-2]Generation of hydrogen gas and production of single-walled carbon nanotubes from cellulose by microwave irradiation

〇Kohei Nakagawa1, I Putu Abdi Karya1, Al Jalali Muhammad1, Yota Kageyama2, Takayuki Asano2, Toyohiko Nishiumi2, Fumihiro Nishimura3, Yoshinori Tatematsu1, Seitaro Mitsudo2 (1.FIR, Univ. of Fukui, 2.Dept. of Appl. Phys., Univ. of Fukui, 3.HISAC., Univ. of Fukui)

[22p-A306-3]Film formation process dependence of lightweight and flexible electromagnetic wave shielding materials composed of carbon nanotubes and elastomeric materials

〇(M2)Naoaki Yoshida1, Fuma Kondo1, Tetsuo Soga1, Naoki Kishi1 (1.Nagoya Inst. of Tech.)

[22p-A306-4]Relation between interfacial electronic states and mechanical properties of carbon nanotube/epoxy resin nanocomposites

〇(M2)Fumiya Ando1, Tomoe Yayama1, Fumiko Akagi1 (1.Kogakuin Univ.)

[22p-A306-5]Development of Dynamical Lock-in Thermography Method for Detecting Early Fracture Phenomena

〇Takahiro Morimoto1 (1.AIST)

[22p-A306-6]Mechanical Properties of graphene oxide-intoroduced carbon nanotube yarn

〇Mizuki Iwahara1, Katuhiro Urata1, Kazunari Kinoshita1, Haolu Lin1, Hiroo Suzuki1, Takeshi Nishikawa1, Yasuhiko Hayashi1 (1.Okayama Univ.)

[22p-A306-7]Improvement of thermoelectric performance of CNT yarn by stabilizing joule annealing

〇Yuki Ikeda1, Shinya Nakahori1, Kazunari Kinoshita1, Lin Haolu1, Hiroo Suzuki1, Takeshi Nishikawa1, Yasuhiko Hayashi1 (1.Okayama Univ.)

[22p-A306-8]Photoinduced electron doping of single-walled carbon nanotubes by photo base generators

〇Naoki Tanaka1,2, Mei Yamamoto1, Tsuyohiko Fujigaya1,2,3 (1.Kyushu Univ., 2.WPI-I2CNER, 3.CMS)

[22p-A306-9]Evaluation of device stability in thermoelectric power generation using single-walled carbon nanotubes

〇Naoki Tanaka1,2, Emi Honjo1, Tsuyohiko Fujigaya1,2,3 (1.Kyushu Univ., 2.WPI-I2CNER, 3.CMS)

[22p-A306-10]Electromechanical Switching of a C60 chain in a Nanogap

〇(M2)Masato Takei1,2, Hiroshi Suga1,2, Takatsugu Wakahara2, Katsunori Wakabayashi4, Susumu Okada3, Kazuhito Tsukagoshi2,1 (1.Chiba Tech, 2.NIMS, 3.UT, 4.KGU)

[22p-A306-11]Thermal Conductivity Analysis of Single-walled Carbon Nanotubes Based on Photoluminescence Imaging Spectroscopy

〇Masaru Irita1, Homma Yoshikazu1, Takahiro Yamamoto1 (1.Tokyo Univ. of Science)

[22p-A306-12]Development of electric double layer transistors using carbon nanotube composite thread

〇Hiroki Kodaira1, Takahide Oya1 (1.Yokohama National University)

[22p-A306-13]Evaluation for responsiveness of hydrogen gas sensor using carbon-nanotube-composite paper with carbon-nanotube to pulp content ratio

〇Shuntaro Kubo1, Koya Arai2, Takahide Oya1 (1.Yokohama National Univ., 2.Mitsubishi Materials)

[22p-A306-14]Selective Detection of Gas Species Using Single-Walled Carbon Nanotubes Decorated with Phenanthroline-based Nanocalipers

〇Ken Hiraoka1, Kota Tanaka1, Fu Xinyi2, Hiroshi tabata1, Osamu Maida1, Naoki Komatsu2, Mitsuhiro Katayama1 (1.Osaka Univ., 2.Kyoto Univ.)

[22p-A306-15]Resistance switching in C60 pyrrolidine tris acid thin film of vertical structural element

〇(M2)Takuma Hirama1,2, Hiroshi Suga1,2, Kazuhito Tsukagoshi2,1 (1.Chiba-tech, 2.NIMS)

[22p-A306-16]Development of new power generating paper based on carbon-nanotube-composite paper utilizing mist flow

〇(B)Hiyu Mitsumaki1, Koya Arai2, Takahide Oya1 (1.Yokohama National Univ., 2.Mitsubishi Marerials)

[22p-A306-17]Development of tribo-electric nano-generator using carbon nanotube composite paper

〇(M1)Kazuki Okochi1, Oya Takahide1 (1.Yokokoku Univ.)

[22p-A306-18]Negative capacitance properties of the CNT/Cu structure

〇(M1)Yuki Tanioka1, Kaito Matuo1, Sota Fujimoto1, Ryo Kiyofuji1, Yong Sun1 (1.kyuko Inst.)

[22p-A306-19]Effect of Cylinder Diameter of Separator for S/M Separation of SWCNTs by Electric-filed Induced Layer Formation Method

〇Yuki Kuwahara1, Indra M. Khoris1, Ryota Yuge2, Takeshi Saito1 (1.AIST, 2.NEC)

[22p-A306-20]Electrical Characterizations of Semi-conducting CNT Networks for Infrared Detectors

〇Tomo Tanaka1,2, Megumi Kanaori2, Toshie Miyamoto1,2, Ryota Yuge1,2 (1.NEC, 2.AIST)

[22p-A306-21]Improvement study of positive electrode based on carbon nanotube composite paper for paper dye-sensitized solar cells incorporating gel electrolyte

〇Yi Kou1, Takahide Oya1 (1.Yokohama National Univ.)

[22p-A306-22]Stoichiometric study on dry purification of carbon nanotubes by using iron chloride

〇Takeshi Saito1, Yuki Kuwahara1, Indra M. Khoris1, Mitsuharu Tabuchi1, Hiromichi Kataura1, Ryota Yuge2, Suguru Noda3 (1.AIST, 2.NEC, 3.Waseda Univ.)