[10p-PB1-1~27] 6.3 Oxide electronics | The 87th JSAP Autumn Meeting 2026

Advanced Search

Session Details

Poster presentation6 Thin Films and Surfaces : 6.3 Oxide electronics

[10p-PB1-1~27]6.3 Oxide electronics

Thu. Sep 10, 2026 2:00 PM - 3:30 PM JST
Thu. Sep 10, 2026 5:00 AM - 6:30 AM UTC

PB1 (2nd Gymnasium)

[10p-PB1-1]Electric-Conduction Properties of La1-xBaxMnO3 Poly-Crystalline Thin Films produced by Metal Organic Decomposition (MOD) Method

〇Ryuta Nakao¹, Hiromi Kobori¹, Atsushi Yamasaki¹ (1.Konan Univ.)

[10p-PB1-2]Electrical and Magnetic Conductivity Properties of La_1-xCa_xMnO₃ Poly-CrystallineThin Films Prepared by the Metal-Organic Decomposition (MOD) Method

〇Shinpei Tsuru¹, Hiromi Kobori¹, Atsushi Yamasaki¹ (1.Konan Univ.)

[10p-PB1-3]Anomalous Hall Effect and Interfacial Magnetic State in Compositionally-Graded Ru Doped (La, Sr)MnO₃ Films

〇(M2)Yuto Abiko¹, Kenichi Kaminaga¹, Takayasu Hanashima², Kazuhiro Akutsu-Suyama², Shingo Maruyama^1,3, Hiroyuki Aoki^4,5, Yuji Matsumoto¹ (1.Tohoku Univ., 2.CROSS, 3.Shizuoka Univ., 4.JAEA, 5.KEK)

[10p-PB1-4]Effect of heat treatment on crystal phase of VO₂ films by mist CVD using aqueous vanadium oxalate oxide solution

〇Asuka Ito¹, Tahashi Masashi¹, Goto Hideo¹ (1.Chubu Univ.)

[10p-PB1-5]All-Solid-State Redox Transistor Based on VO₂ Thin Films and Li⁺ Solid Electrolyte

〇(M2)Taisei Yamada¹, Naohiro Egawa¹, Naoya Arihara¹, Tohru Higuchi¹ (1.Tokyo Univ. Sci)

[10p-PB1-6]Infrared optical switching under applied voltage in VO2/AZO/polyimide/quartz layered structures

〇Shun Aida¹, Kunio Okimura¹ (1.Graduate School of EngineeringTokai Univ)

[10p-PB1-7]Effect of substrate bias on the growth of VO₂ thin films on TiO₂(001) substrate by RF magnetron sputtering

〇Keisuke Kudo¹, Md. Suruz Mian¹, Kunio Okimura¹ (1.Tokai Univ.)

[10p-PB1-8]Microstructure and Compositional Distribution of V/TaO_x-based Threshold Switching Memristor with and without Electrical Operations

〇Kazuma Murata¹, Zih-Siao Liao², Jen-Sue Chen², Yukio Sato¹ (1.Kumamoto Univ., 2.National Cheng Kung Univ.)

[10p-PB1-9]Growth of Yttrium oxide thin films applied for memristor

〇(B)Kosei Morita¹, Toyooka Shuuto², Takahashi Isao^3,4, Takahashi Ryouhei⁵, Kimura Mutsumi⁵, Kaneko kenntaro^3,4 (1.Ritsumeikan Univ, 2.kindai Univ, 3.ROST Ritsumeikan Univ, 4.RISA, 5.Ryukoku Univ)

English Presentation

[10p-PB1-10]Effects of bismuth incorporation site and oxidation state of bismuth oxide on
threshold voltage and current non-linearity of thin-film Bi-doped ZnO varistors

〇Efi Dwi Indari¹, Shinjiro Yagyu¹, Naoki Ohashi¹, Takahiro Nagata¹ (1.NIMS)

[10p-PB1-11]Energy Band Structure of Nb-Doped TiO₂ Films Examined by UPS and LEIPS

〇Chikai Sato¹, Takanori Itoh¹, Ryota Kimura², Kenichi Kaminaga², Yuji Matsumoto² (1.NISSAN ARC Ltd., 2.Tohoku Univ.)

[10p-PB1-12]Evaluation of organic pollutant decomposition using the QCM method
for space applications of photocatalyst

〇Koki Matsumoto¹, Hiroshi Sakama², Chisako Kanzaki³, Eiji Miyazaki³ (1.Shizuoka Univ., 2.Sophia Univ., 3.JAXA)

[10p-PB1-13]Evaluation of photofunctional properties of LMS-1 lunar regolith simulant for in-situ resource utilization

〇Daijiro Kawanami¹, Naoki Shimosako¹ (1.Shizuoka Univ)

[10p-PB1-14]g-C3N4-Modified ZnO Nanorod Photocatalysts Prepared by Water Bath Synthesis.

〇(M1)Kosei Sato¹, Naoki Ohtani¹ (1.Doshisha Univ.)

[10p-PB1-15]Photocatalytic Effects of a Titanium Dioxide / Calcium Phosphate Hybridized Sheet

〇(D)Shohei Kajiwara¹, Kiyoshi Itatani^1,2, Hideki Kuwahara¹, Takeshi Toyama², Taishi Yokoi³, Tetsuo Sasaki⁴, Haruhiko Kuroe¹ (1.Sophia Univ., 2.Nihon Univ., 3.Science Tokyo IBB, 4.Shizuoka Univ.)

[10p-PB1-16]Liquid Phase Deposition of Metal-Cation-Doped TiO₂ Photocatalyst with Different Dopant Valences for Acetaldehyde Decomposition

〇Mitsuhiro Honda¹, Tsuyoshi Ochiai², Yusuke Inukai¹, Daiki Ishihara¹, Yo Ichikawa¹, Tomoyuki Tamura¹ (1.NITech, 2.KISTEC)

[10p-PB1-17]Synthesis of thin films composed of carbon nitride and zinc oxide using thermal CVD

〇(M1)Masaya Kobayashi¹, Keigo Takeda¹ (1.Meijo Univ)

[10p-PB1-18]Characterization of Cu₂O films deposited by DC sputtering using a copper-rich oxide target

〇(M1)Yutaro Murayama¹, Akio Sekiguchi¹, Kensho Hatakawa¹, Shinsuke Miyajima¹ (1.Science Tokyo)

[10p-PB1-19]Effect of Oxygen Flow Rate on the Band Gap of CuO Thin Films Exhibiting Adsorption-induced Electrochromic Phenomenon

〇(M1)Kazusa Ozawa¹, Yasushi Inoue¹, Osamu Takai² (1.Chiba.Inst.Technol, 2.SSAME)

[10p-PB1-20]Charge-discharge characteristics of composite electrode of vertically aligned F:SnO₂ conductive nanofibers and Li₄Ti₅O₁₂

〇(M2)Kohei Yukino¹, Obara Masafumi¹, Nomiyama Teruaki¹, Horie Yuji¹ (1.Kagoshima Univ.)

[10p-PB1-21]Effect of hot press on the ionic conductivity at Li_0.35La_0.55TiO₃/Li₄Ti₅O₁₂ nanofiber interface

〇Konosuke Tsuruda¹, Kentaro Oura¹, Yuta Sasaki¹, Teruaki Nomiyama¹, Yuji Horie¹ (1.kagoshima university)

[10p-PB1-22]Effect of Al Substitution on the charge-discharge characteristics of Li₄Ti₅O₁₂ nanofibers Ⅱ

〇Syota Umeki¹, Masafumi Obara¹, Konosuke Tsuruda¹, Teruaki Nomiyama¹, Yuji Horie¹ (1.Kagoshima Univ.)

[10p-PB1-23]Epitaxial film synthesis and physical properties evaluation of 5d electron system SrTaO3

〇Akichika Yasunaga¹, Kohei Ueda^1,2,3, Junichi Shiogai^1,2, Jobu Matsuno^1,2,3 (1.Dept. of Phys., Univ. of Osaka, 2.OTRI-Spin, Univ. of Osaka, 3.CSRN, Univ. of Osaka)

[10p-PB1-24]Optimization of the release process for freestanding La_1.85Sr_0.15CuO₄ membrane using epitaxial lift-off technique

〇(M1)Shiho Irie¹, Junichi Shiogai^1,2, Takumi Yamazaki³, Takeshi Seki^3,4,5, Jobu Matsuno^1,2 (1.Dept. of Phys., Univ. of Osaka, 2.OTRI-Spin, Univ. Osaka, 3.IMR, Tohoku Univ., 4.CSIS, Tohoku Univ., 5.SRIS, Tohoku Univ.)

The 87th JSAP Autumn Meeting 2026

Session Details

[10p-PB1-1~27]6.3 Oxide electronics

[10p-PB1-1]Electric-Conduction Properties of La1-xBaxMnO3 Poly-Crystalline Thin Films produced by Metal Organic Decomposition (MOD) Method

[10p-PB1-2]Electrical and Magnetic Conductivity Properties of La_1-xCa_xMnO₃ Poly-CrystallineThin Films Prepared by the Metal-Organic Decomposition (MOD) Method

[10p-PB1-3]Anomalous Hall Effect and Interfacial Magnetic State in Compositionally-Graded Ru Doped (La, Sr)MnO₃ Films

[10p-PB1-4]Effect of heat treatment on crystal phase of VO₂ films by mist CVD using aqueous vanadium oxalate oxide solution

[10p-PB1-5]All-Solid-State Redox Transistor Based on VO₂ Thin Films and Li⁺ Solid Electrolyte

[10p-PB1-6]Infrared optical switching under applied voltage in VO2/AZO/polyimide/quartz layered structures

[10p-PB1-7]Effect of substrate bias on the growth of VO₂ thin films on TiO₂(001) substrate by RF magnetron sputtering

[10p-PB1-8]Microstructure and Compositional Distribution of V/TaO_x-based Threshold Switching Memristor with and without Electrical Operations

[10p-PB1-9]Growth of Yttrium oxide thin films applied for memristor

[10p-PB1-10]Effects of bismuth incorporation site and oxidation state of bismuth oxide on
threshold voltage and current non-linearity of thin-film Bi-doped ZnO varistors

[10p-PB1-11]Energy Band Structure of Nb-Doped TiO₂ Films Examined by UPS and LEIPS

[10p-PB1-12]Evaluation of organic pollutant decomposition using the QCM method
for space applications of photocatalyst

[10p-PB1-13]Evaluation of photofunctional properties of LMS-1 lunar regolith simulant for in-situ resource utilization

[10p-PB1-14]g-C3N4-Modified ZnO Nanorod Photocatalysts Prepared by Water Bath Synthesis.

[10p-PB1-15]Photocatalytic Effects of a Titanium Dioxide / Calcium Phosphate Hybridized Sheet

[10p-PB1-16]Liquid Phase Deposition of Metal-Cation-Doped TiO₂ Photocatalyst with Different Dopant Valences for Acetaldehyde Decomposition

[10p-PB1-17]Synthesis of thin films composed of carbon nitride and zinc oxide using thermal CVD

[10p-PB1-18]Characterization of Cu₂O films deposited by DC sputtering using a copper-rich oxide target

[10p-PB1-19]Effect of Oxygen Flow Rate on the Band Gap of CuO Thin Films Exhibiting Adsorption-induced Electrochromic Phenomenon

[10p-PB1-20]Charge-discharge characteristics of composite electrode of vertically aligned F:SnO₂ conductive nanofibers and Li₄Ti₅O₁₂

[10p-PB1-21]Effect of hot press on the ionic conductivity at Li_0.35La_0.55TiO₃/Li₄Ti₅O₁₂ nanofiber interface

[10p-PB1-22]Effect of Al Substitution on the charge-discharge characteristics of Li₄Ti₅O₁₂ nanofibers Ⅱ

[10p-PB1-23]Epitaxial film synthesis and physical properties evaluation of 5d electron system SrTaO3

[10p-PB1-24]Optimization of the release process for freestanding La_1.85Sr_0.15CuO₄ membrane using epitaxial lift-off technique

[10p-PB1-25]Fabrication of SrCeF₅/NdNiO₃ heterostructures and electrochemical transistor characteristics

[10p-PB1-26]Surface morphology of oxide targets in pulsed laser deposition using Nd:YAG laser

[10p-PB1-27]Evaluation of Oriented Ga₂O₃ Thin Films synthesized by using PLD

Session Details

[10p-PB1-1~27]6.3 Oxide electronics

[10p-PB1-1]Electric-Conduction Properties of La1-xBaxMnO3 Poly-Crystalline Thin Films produced by Metal Organic Decomposition (MOD) Method

[10p-PB1-2]Electrical and Magnetic Conductivity Properties of La1-xCaxMnO3 Poly-CrystallineThin Films Prepared by the Metal-Organic Decomposition (MOD) Method

[10p-PB1-3]Anomalous Hall Effect and Interfacial Magnetic State in Compositionally-Graded Ru Doped (La, Sr)MnO3 Films

[10p-PB1-4]Effect of heat treatment on crystal phase of VO2 films by mist CVD using aqueous vanadium oxalate oxide solution

[10p-PB1-5]All-Solid-State Redox Transistor Based on VO2 Thin Films and Li+ Solid Electrolyte

[10p-PB1-6]Infrared optical switching under applied voltage in VO2/AZO/polyimide/quartz layered structures

[10p-PB1-7]Effect of substrate bias on the growth of VO2 thin films on TiO2(001) substrate by RF magnetron sputtering

[10p-PB1-8]Microstructure and Compositional Distribution of V/TaOx-based Threshold Switching Memristor with and without Electrical Operations

[10p-PB1-9]Growth of Yttrium oxide thin films applied for memristor

[10p-PB1-10]Effects of bismuth incorporation site and oxidation state of bismuth oxide onthreshold voltage and current non-linearity of thin-film Bi-doped ZnO varistors

[10p-PB1-11]Energy Band Structure of Nb-Doped TiO2 Films Examined by UPS and LEIPS

[10p-PB1-12]Evaluation of organic pollutant decomposition using the QCM methodfor space applications of photocatalyst

[10p-PB1-13]Evaluation of photofunctional properties of LMS-1 lunar regolith simulant for in-situ resource utilization

[10p-PB1-14]g-C3N4-Modified ZnO Nanorod Photocatalysts Prepared by Water Bath Synthesis.

[10p-PB1-15]Photocatalytic Effects of a Titanium Dioxide / Calcium Phosphate Hybridized Sheet

[10p-PB1-16]Liquid Phase Deposition of Metal-Cation-Doped TiO2 Photocatalyst with Different Dopant Valences for Acetaldehyde Decomposition

[10p-PB1-17]Synthesis of thin films composed of carbon nitride and zinc oxide using thermal CVD

[10p-PB1-18]Characterization of Cu2O films deposited by DC sputtering using a copper-rich oxide target

[10p-PB1-19]Effect of Oxygen Flow Rate on the Band Gap of CuO Thin Films Exhibiting Adsorption-induced Electrochromic Phenomenon

[10p-PB1-20]Charge-discharge characteristics of composite electrode of vertically aligned F:SnO2 conductive nanofibers and Li4Ti5O12

[10p-PB1-21]Effect of hot press on the ionic conductivity at Li0.35La0.55TiO3/Li4Ti5O12 nanofiber interface

[10p-PB1-22]Effect of Al Substitution on the charge-discharge characteristics of Li4Ti5O12 nanofibers Ⅱ

[10p-PB1-23]Epitaxial film synthesis and physical properties evaluation of 5d electron system SrTaO3

[10p-PB1-24]Optimization of the release process for freestanding La1.85Sr0.15CuO4 membrane using epitaxial lift-off technique

[10p-PB1-25]Fabrication of SrCeF5/NdNiO3 heterostructures and electrochemical transistor characteristics

[10p-PB1-26]Surface morphology of oxide targets in pulsed laser deposition using Nd:YAG laser

[10p-PB1-27]Evaluation of Oriented Ga2O3 Thin Films synthesized by using PLD

[10p-PB1-2]Electrical and Magnetic Conductivity Properties of La_1-xCa_xMnO₃ Poly-CrystallineThin Films Prepared by the Metal-Organic Decomposition (MOD) Method

[10p-PB1-3]Anomalous Hall Effect and Interfacial Magnetic State in Compositionally-Graded Ru Doped (La, Sr)MnO₃ Films

[10p-PB1-4]Effect of heat treatment on crystal phase of VO₂ films by mist CVD using aqueous vanadium oxalate oxide solution

[10p-PB1-5]All-Solid-State Redox Transistor Based on VO₂ Thin Films and Li⁺ Solid Electrolyte

[10p-PB1-7]Effect of substrate bias on the growth of VO₂ thin films on TiO₂(001) substrate by RF magnetron sputtering

[10p-PB1-8]Microstructure and Compositional Distribution of V/TaO_x-based Threshold Switching Memristor with and without Electrical Operations

[10p-PB1-10]Effects of bismuth incorporation site and oxidation state of bismuth oxide on
threshold voltage and current non-linearity of thin-film Bi-doped ZnO varistors

[10p-PB1-11]Energy Band Structure of Nb-Doped TiO₂ Films Examined by UPS and LEIPS

[10p-PB1-12]Evaluation of organic pollutant decomposition using the QCM method
for space applications of photocatalyst

[10p-PB1-16]Liquid Phase Deposition of Metal-Cation-Doped TiO₂ Photocatalyst with Different Dopant Valences for Acetaldehyde Decomposition

[10p-PB1-18]Characterization of Cu₂O films deposited by DC sputtering using a copper-rich oxide target

[10p-PB1-20]Charge-discharge characteristics of composite electrode of vertically aligned F:SnO₂ conductive nanofibers and Li₄Ti₅O₁₂

[10p-PB1-21]Effect of hot press on the ionic conductivity at Li_0.35La_0.55TiO₃/Li₄Ti₅O₁₂ nanofiber interface

[10p-PB1-22]Effect of Al Substitution on the charge-discharge characteristics of Li₄Ti₅O₁₂ nanofibers Ⅱ

[10p-PB1-24]Optimization of the release process for freestanding La_1.85Sr_0.15CuO₄ membrane using epitaxial lift-off technique

[10p-PB1-25]Fabrication of SrCeF₅/NdNiO₃ heterostructures and electrochemical transistor characteristics

[10p-PB1-27]Evaluation of Oriented Ga₂O₃ Thin Films synthesized by using PLD