[24p-12M-1~21] 16.3 Bulk, thin-film and other silicon-based solar cells | The 71st JSAP Spring Meeting 2024

Advanced Search

Session Details

Oral presentation16 Amorphous and Microcrystalline Materials : 16.3 Bulk, thin-film and other silicon-based solar cells

[24p-12M-1~21]16.3 Bulk, thin-film and other silicon-based solar cells

Sun. Mar 24, 2024 1:00 PM - 7:00 PM JST
Sun. Mar 24, 2024 4:00 AM - 10:00 AM UTC

12M (Building No. 1)

Yasushi Sobajima(Gifu Univ.), Hitoshi Sai(AIST), Tomihisa Tachibana(AIST), Kazuhiro Goto(Nagoya Univ.)

1:00 PM - 1:15 PM JST(4:00 AM - 4:15 AM UTC)

[24p-12M-1]Impact of substrate properties on silicon nanocone formation using intermediate-pressure hydrogen plasma

〇Ken Sakamoto¹, Toshimitsu Nomura¹, Hiroaki Kakiuchi¹, Hiromasa Ohmi¹ (1.Osaka Univ.)

1:15 PM - 1:30 PM JST(4:15 AM - 4:30 AM UTC)

[24p-12M-2]Fabrication of high quality carrier select ive contact layer using a Si :H deposition with PECVD and thermal process

〇Tomihisa Tachibana¹, Kastuhiko Shirasawa¹, Katsuto Tanahashi¹, Yuuki Yuasa², Norikazu Itou², Teppei Yamashita², Kenji Fukuchi², Yuuta Irie², Hiroaki Takahashi², Kouichirou Niira² (1.AIST, 2.Kyocera)

1:30 PM - 1:45 PM JST(4:30 AM - 4:45 AM UTC)

[24p-12M-3]Carrier-selective passivating contact induced by a metal/ultrathin Al-doped SiO_x contact on a p-type crystalline Si surface

〇(D)Hiroki Nakajima¹, Huynh Thi Cam Tu¹, Keisuke Ohdaira¹ (1.JAIST)

1:45 PM - 2:00 PM JST(4:45 AM - 5:00 AM UTC)

[24p-12M-4]Investigation of a sputtered SnO_x film as an electron selective contact for SHJ solar cells

〇Tu ThiCam Huynh¹, Keisuke Ohdaira¹ (1.JAIST)

2:00 PM - 2:15 PM JST(5:00 AM - 5:15 AM UTC)

[24p-12M-5]In-free SHJ solar cells with amorphous SnO₂ and nanocrystalline Si layers

〇Hitoshi Sai¹, Takashi Koida¹, Takuya Matsui¹ (1.AIST)

2:15 PM - 2:30 PM JST(5:15 AM - 5:30 AM UTC)Presentation by Applicant for JSAP Young Scientists Presentation Award

[24p-12M-6]Optimization of a-Si:H/O/c-Si interface using on-the-fly machine learning potential molecular dynamics simulations

〇Semba Takayuki¹, Ryoji Asahi¹, Ryosuke Jinnnouchi¹, Jacob Mckibbin² (1.Nagoya Univ., 2.North Carolina Univ.)

2:45 PM - 3:00 PM JST(5:45 AM - 6:00 AM UTC)Presentation by Applicant for JSAP Young Scientists Presentation Award

[24p-12M-7]Exploration of deposition conditions of n-a-Si using Bayesian optimization for SHJ solar cell applications

〇(M2)Ryota Ohshi¹, Kentao Kutsukake², Huynh Thi Cam Tu¹, Keisuke Ohdaira¹ (1.JAIST, 2.RIKEN)

3:00 PM - 3:15 PM JST(6:00 AM - 6:15 AM UTC)Presentation by Applicant for JSAP Young Scientists Presentation AwardEnglish Presentation

[24p-12M-8]Optimization of i-a-Si:H passivation process by DC facing target sputtering deposition

〇(D)Shasha Li¹, Shinsuke Miyajima¹ (1.Tokyo Tech)

3:15 PM - 3:30 PM JST(6:15 AM - 6:30 AM UTC)Presentation by Applicant for JSAP Young Scientists Presentation Award

[24p-12M-9]Improvement of Passivation Performance of TiO_x/SiO_y/c-Si Heterostructure by Introducing an Atomic-Layer-Deposited TiO_x:Nb Layer

〇Shohei Fukaya¹, Kazuhiro Gotoh^1,3,4, Yasuyoshi Kurokawa¹, Noritaka Usami^1,2,5 (1.Nagoya Univ., 2.InFuS Nagoya Univ., 3.Niigata Univ., 4.IRCNT Niigata Univ., 5.IMaSS Nagoya Univ.)

3:30 PM - 3:45 PM JST(6:30 AM - 6:45 AM UTC)Presentation by Applicant for JSAP Young Scientists Presentation Award

[24p-12M-10]Formation of high quality hole selective contact by sputtered amorphous Si and spin-on-doping

〇(B)Kouki Omori¹, Shasha Li¹, Shinsuke Miyajima¹ (1.Tokyo Tech)

3:45 PM - 4:00 PM JST(6:45 AM - 7:00 AM UTC)Presentation by Applicant for JSAP Young Scientists Presentation Award

[24p-12M-11]Influence of Texture Size and Rounding Process on Three-dimensional Flexibility of Single Crystal Si Wafers

〇(M2)KOKI IDE¹, Tappei Nishihara^2,6, Kyotaro Nakamura³, Yoshio Ohshita³, Tomoyuki Kawatsu⁴, Toshiki Nagai⁴, Noboru Yamada⁵, Phuong Trang Pham⁵, Atsushi Ogura^1,6 (1.Meiji Univ., 2.JASRI, 3.Toyota Technological Institute, 4.Komatsu NTC Ltd, 5.Nagaoka Univ of Technology, 6.Meiji Renewable Energy Laboratory)

4:00 PM - 4:15 PM JST(7:00 AM - 7:15 AM UTC)Presentation by Applicant for JSAP Young Scientists Presentation Award

[24p-12M-19]Improvement of Waterproof Performance in Encapsulant-less Curved
Crystalline Si PV Modules with Polycarbonate as a Substitute for Cover Glass

〇Shuntaro Shimpo¹, Huynh Thi Cam Tu¹, Keisuke Ohdaira¹ (1.JAIST)

6:30 PM - 6:45 PM JST(9:30 AM - 9:45 AM UTC)

[24p-12M-20]The operating temperature suppression effect by high thermal conductivity particle composite layer on crystal silicon solar cell module without encapsulant

〇Yasushi Sobajima¹, Kouzen Wakazono¹, Shinya Tsukamoto¹, Keisuke Ohdaira² (1.Gifu Univ., 2.JAIST)

6:45 PM - 7:00 PM JST(9:45 AM - 10:00 AM UTC)

[24p-12M-21]Analysis of Reflectance Reduction Structure in Encapsulation-less Si Solar Modules Using RCWA Method

〇(M1)Shota Nakai¹, Itaru Raifuku¹, Yasuaki Ishikawa¹ (1.Aoyama Gakuin Univ.)

Back to Category List

The 71st JSAP Spring Meeting 2024

Session Details

[24p-12M-1~21]16.3 Bulk, thin-film and other silicon-based solar cells

[24p-12M-1]Impact of substrate properties on silicon nanocone formation using intermediate-pressure hydrogen plasma

[24p-12M-2]Fabrication of high quality carrier select ive contact layer using a Si :H deposition with PECVD and thermal process

[24p-12M-3]Carrier-selective passivating contact induced by a metal/ultrathin Al-doped SiO_x contact on a p-type crystalline Si surface

[24p-12M-4]Investigation of a sputtered SnO_x film as an electron selective contact for SHJ solar cells

[24p-12M-5]In-free SHJ solar cells with amorphous SnO₂ and nanocrystalline Si layers

[24p-12M-6]Optimization of a-Si:H/O/c-Si interface using on-the-fly machine learning potential molecular dynamics simulations

[24p-12M-7]Exploration of deposition conditions of n-a-Si using Bayesian optimization for SHJ solar cell applications

[24p-12M-8]Optimization of i-a-Si:H passivation process by DC facing target sputtering deposition

[24p-12M-9]Improvement of Passivation Performance of TiO_x/SiO_y/c-Si Heterostructure by Introducing an Atomic-Layer-Deposited TiO_x:Nb Layer

[24p-12M-10]Formation of high quality hole selective contact by sputtered amorphous Si and spin-on-doping

[24p-12M-11]Influence of Texture Size and Rounding Process on Three-dimensional Flexibility of Single Crystal Si Wafers

[24p-12M-12]Evaluation of Stress around Electrodes of Crystalline Silicon Solar Cells under Temperature Change

[24p-12M-13]Influence of aging test on curved crystalline Si photovoltaic modules without encapsulant

[24p-12M-14]Mitigation of Potential-Induced Degradation Phenomena by Li Element in Crystalline Si Photovoltaic Modules

[24p-12M-15]Highly Efficient Decorative Technique for Building-Integrated Photovoltaics V

[24p-12M-16]Whitening with Cellulose Materials for Building-Integrated Photovoltaics

[24p-12M-17]Durability evaluation of structural colored glasses for BIPV by accelerated stress tests

[24p-12M-18]Effectiveness of black back sheet with IR reflection in tandem photovoltaic modules

[24p-12M-19]Improvement of Waterproof Performance in Encapsulant-less Curved
Crystalline Si PV Modules with Polycarbonate as a Substitute for Cover Glass

[24p-12M-20]The operating temperature suppression effect by high thermal conductivity particle composite layer on crystal silicon solar cell module without encapsulant

[24p-12M-21]Analysis of Reflectance Reduction Structure in Encapsulation-less Si Solar Modules Using RCWA Method

Session Details

[24p-12M-1~21]16.3 Bulk, thin-film and other silicon-based solar cells

[24p-12M-1]Impact of substrate properties on silicon nanocone formation using intermediate-pressure hydrogen plasma

[24p-12M-2]Fabrication of high quality carrier select ive contact layer using a Si :H deposition with PECVD and thermal process

[24p-12M-3]Carrier-selective passivating contact induced by a metal/ultrathin Al-doped SiOx contact on a p-type crystalline Si surface

[24p-12M-4]Investigation of a sputtered SnOx film as an electron selective contact for SHJ solar cells

[24p-12M-5]In-free SHJ solar cells with amorphous SnO2 and nanocrystalline Si layers

[24p-12M-6]Optimization of a-Si:H/O/c-Si interface using on-the-fly machine learning potential molecular dynamics simulations

[24p-12M-7]Exploration of deposition conditions of n-a-Si using Bayesian optimization for SHJ solar cell applications

[24p-12M-8]Optimization of i-a-Si:H passivation process by DC facing target sputtering deposition

[24p-12M-9]Improvement of Passivation Performance of TiOx/SiOy/c-Si Heterostructure by Introducing an Atomic-Layer-Deposited TiOx:Nb Layer

[24p-12M-10]Formation of high quality hole selective contact by sputtered amorphous Si and spin-on-doping

[24p-12M-11]Influence of Texture Size and Rounding Process on Three-dimensional Flexibility of Single Crystal Si Wafers

[24p-12M-12]Evaluation of Stress around Electrodes of Crystalline Silicon Solar Cells under Temperature Change

[24p-12M-13]Influence of aging test on curved crystalline Si photovoltaic modules without encapsulant

[24p-12M-14]Mitigation of Potential-Induced Degradation Phenomena by Li Element in Crystalline Si Photovoltaic Modules

[24p-12M-15]Highly Efficient Decorative Technique for Building-Integrated Photovoltaics V

[24p-12M-16]Whitening with Cellulose Materials for Building-Integrated Photovoltaics

[24p-12M-17]Durability evaluation of structural colored glasses for BIPV by accelerated stress tests

[24p-12M-18]Effectiveness of black back sheet with IR reflection in tandem photovoltaic modules

[24p-12M-19]Improvement of Waterproof Performance in Encapsulant-less CurvedCrystalline Si PV Modules with Polycarbonate as a Substitute for Cover Glass

[24p-12M-20]The operating temperature suppression effect by high thermal conductivity particle composite layer on crystal silicon solar cell module without encapsulant

[24p-12M-21]Analysis of Reflectance Reduction Structure in Encapsulation-less Si Solar Modules Using RCWA Method

[24p-12M-3]Carrier-selective passivating contact induced by a metal/ultrathin Al-doped SiO_x contact on a p-type crystalline Si surface

[24p-12M-4]Investigation of a sputtered SnO_x film as an electron selective contact for SHJ solar cells

[24p-12M-5]In-free SHJ solar cells with amorphous SnO₂ and nanocrystalline Si layers

[24p-12M-9]Improvement of Passivation Performance of TiO_x/SiO_y/c-Si Heterostructure by Introducing an Atomic-Layer-Deposited TiO_x:Nb Layer

[24p-12M-19]Improvement of Waterproof Performance in Encapsulant-less Curved
Crystalline Si PV Modules with Polycarbonate as a Substitute for Cover Glass