Session Details
[18p-P09-1~54]12.5 Organic and hybrid solar cells
Wed. Sep 18, 2024 4:00 PM - 6:00 PM JST
Wed. Sep 18, 2024 7:00 AM - 9:00 AM UTC
Wed. Sep 18, 2024 7:00 AM - 9:00 AM UTC
P09 (Exhibition Hall A)
[18p-P09-1]Development of control methods for crystallinity and film morphology of SbSI thin films via gas-solid phase reactions
〇Shosuke Murayama1, Nishikubo Ryosuke1, Saeki Akinori1 (1.Osaka Univ.)
[18p-P09-2]Utilization of Curcumin as an acceptor material for organic photovoltaics
〇(D)Yutaro Ono1,2, Yoichi Yamada2, Kouki Akaike1 (1.AIST, 2.Univ. Tsukuba)
[18p-P09-3]Development of novel “non-fullerene hybrid” fullerene derivatives
〇Kenta Tanaka1, Tsubasa Mikie1, Itaru Osaka1 (1.Hiroshima Univ.)
[18p-P09-4]Electron-Spin-Resonance Study on Degradation Mechanisms in Non-Fullerene Organic Photovoltaics Using PDINO Electron Transport Layers
〇Kaito Inoue1, Seira Yamaguchi1,2, Atsushi Sato1, Yizhou Chen1, Masahiko Saito3, Itaru Osaka3, Yukihiro Shimoi1, Kazuhiro Marumoto1,2,4 (1.Dep. Mater. Sci., Univ. Tsukuba, 2.IQSST, Univ. Tsukuba, 3.Hiroshima Univ., 4.TREMS, Univ. Tsukuba)
[18p-P09-5]Fabrication and characterization of semi-transparent organic thin-film solar cells using novel p-type polymers containing π-extended diketopyrrolopyrrole backbone
〇Taiki Yamaoka1, Tomoki Nishiyama1, Hirotaka Kitoh-Nisioka1, Senku Tanaka1, Takashi Okubo1 (1.Kindai Univ.)
[18p-P09-6]Characterization of active layers for organic photovoltaics using Femtolactor
〇Masayuki Egashira1, Yasuyuki Watanabe1 (1.Suwa Univ. of Science)
[18p-P09-7]Development of Novel Squaraine Dyes Enabling Photovoltaic Conversion in the Near-Infrared Region for Organic Photovoltaics
〇Takumi Shoji1, Md. Shahiduzzaman1,2, Makoto Karakawa1,2,3, Tetsuya Taima1,2,3, Masahiro Nakano1 (1.Kanazawa Univ., 2.NanoMari, Kanazawa Univ., 3.InFiniti, Kanazawa Univ.)
[18p-P09-8]Evaluation of ultra-thin film photocatalytic devices using organic thin film solar cell structures
〇Akito Yokoyama1, Masahiro Nakano1, Md Shahiduzzaman1,2, Tetsuya Taima1,2,3, Takahiro Yamaguchi1, Makoto Karakawa1,2,3 (1.Nat. Sci. and Tech Kanazawa Univ., 2.Infinity, Kanazawa Univ., 3.NanoMaRi, Kanazawa Univ.)
[18p-P09-9]Photovoltage Mapping of Polymer-Fullerene Solar Cells by Photo-Illuminated Kelvin Probe Force Microscopy
〇(D)CHITLADA MANILATA1, RYOTA HASEGAWA1, MASAKAZU NAKAMURA1, HIROAKI BENTEN1 (1.NAIST)
[18p-P09-10]Polymer Chain Aggregation in Semiconducting Polymer Ink
〇Wentao Xie1, Zhiyuan Liang1, Masakazu Nakamura1, Hiroaki Benten1 (1.NAIST)
[18p-P09-11]A study of trap-assisted recombination process in organic photovoltaics with modulated photocurrent spectroscopy
〇Takashi Hirokawa1, Takashi Nagase1,2, Hiroyoshi Naito1,2,3, Takashi Kobayashi1,2 (1.Osaka Metro. Univ., 2.RIMED, Osaka Metro. Univ., 3.Ritsumeikan Univ. RISA)
[18p-P09-12]Influence of DMSO/DMF ratio on the crystal growth of Sn-based perovskite films
〇Hideto Tokizawa1, Mariko Murayama1,2, Xinwei Zhao1 (1.Tokyo Univ. of Sci., 2.Toyo Univ. Research Institute of Industrial Technology)
[18p-P09-13]Exceeding 15% Performance with Energy Level Tuning in Tin-Based Perovskite Solar Cells
〇(P)Liang Wang1, Qing Shen1, Shuzi Hayase1 (1.UEC)
[18p-P09-14]Inserting the interfacial layer for improving the Voc of Sn perovskite solar cells
〇Liu Jiaqi1, Huan Bi1, Liang Wang1, Qing Shen1, Shuzi Hayase1 (1.UEC)
[18p-P09-15]Preparation of quasi-2D Sn-based perovskites for photovoltaic cells (Ⅱ)
-Effect of nitrogen-containing additives on stability-
〇(D)Chunqing Li1, Masatoshi Yanagida2, Yasuhiro Shirai2, Masahiro Fujita1, Masahiro Rikukawa1, Yuko Takeoka1 (1.Sophia Univ., 2.NIMS)
[18p-P09-16]Influence of Excess Tin (II) Iodide on Photovoltaic Performance of 1.4 eV Wide Bandgap Sn-Pb Perovskite Solar Cells
〇(P)Suraya Shaban1, Kapil Gaurav1, Shahrir Sahamir1, Safalmani Pradhan1, Shuzi Hayase1 (1.UEC-Tokyo)
[18p-P09-17]Effective Defect Passivation at the Grain Boundaries and the Perovskite/ETL Interface for efficient Tin-Lead perovskite solar cells
〇(P)Safalmani Pradhan1, Suraya Shaban1, Ajay Kumar Baranwal1, Gaurav Kapil1, Qing Shen1, Shuzi Hayase1 (1.UEC-Tokyo)
[18p-P09-18]Exploration of substitution elements in organic-inorganic perovskite compounds
〇Kohei Takasaki1, Naomu Sekiguchi1, Qing Wang1, Yuta Tsuji1, Atsushi Wakamiya2, Tomoya Nakamura2, Satoshi Iikubo1 (1.Kyushu Univ., 2.Kyouo Univ.)
[18p-P09-19]Flexophotovoltage of CsPbBr3 crystal in tip-enhanced geometry
〇(M2)Masaki Hiyama1, Yasuhiro Yamada1 (1.Chiba Univ.)
[18p-P09-20]Device simulations of CsPb(Br0.45Cl0.55)3 photovoltaic power converter
〇Kyohei Goi1, Atsuto Watanabe1, Yuejie Tan1, Shinsuke Miyajima1 (1.Tokyo Tech)
[18p-P09-21]【Absence】First-principles calculations of inorganic halide-perovskite surfaces
〇Shohei Miura1, Naoya Yamaguchi2, Fumiyuki Ishii2 (1.Grad. Sch. of Sci. & Tech., Kanazawa Univ., 2.NanoMaRi, Kanazawa Univ.)
[18p-P09-22]Relationship between spacing of coating bar and substrate and film thickness in bar-coating of CH3NH3PbI3
〇(M1C)Masaki Horie1, Masatoshi Koyama1, Toshihiko Maemoto1, Akihiko Fujii1 (1.OIT)
[18p-P09-23]Bar-Coating Method for Perovskite Layer under Ambient Conditions
〇Yuka Ando1, Tomoyuki Tobe1,3, Masashi Ikegami1, Tsutomu Miyasaka2 (1.Graduate School of Engineering,toin Univ of yokohama, 2.Faculty of Biomedical Engineering, 3.KISTEC)
[18p-P09-24]Influence of Heating Time on Anti-solvent-Free Conditions of CsFA Perovskite Layer Using Inkjet Printer
〇Hayato Otsu1, Tobe Tomoyuki1,4, Funayama Ryoto3, Shibayama Naoyuki2, Ikegami Masashi1, Miyasaka Tsutomu2 (1.Graduate School of Engineering, Toin University of Yokohama, 2.Faculty of Biomedical Engineering, Toin University of Yokohama, 3.Kishu Giken Kogyo, Co. Ltd., 4.KISTEC)
[18p-P09-25]Preparation Conditions of Metal Oxide ETL for Improvement of CsFA Perovskite Layer Using Inkjet Method
〇Sora Yoshida1, Tomoyuki Tobe1,4, Ryoto Funayama3, Naoyuki Shibayama2, Masashi Ikegami1, Tsutomu Miyasaka2 (1.Graduate School of Engineering, Toin University of Yokohama, 2.Faculty of Biomedical Engineering, Toin University of Yokohama, 3.Kishu Giken Kogyo, Co. Ltd., 4.KISTEC)
[18p-P09-26]Influence of Heating Time on Anti-solvent-Free Conditions of CsFA Perovskite Layer Using Inkjet Printer
〇Shoukatsu Yamaguchi1, Tomoyuki Tobe1,4, Ryoto Funayama3, Masashi Ikegami1, Tsutomu Miyasaka2 (1.Graduate School of Engineering, Toin University of Yokohama, 2.Faculty of Biomedical Engineering, Toin University of Yokohama, 3.Kishu Giken Kogyo, Co. Ltd., 4.KISTEC)
[18p-P09-27]Preparation Conditions of CsFA Perovskite Layer by Anti-Solvent-Free Method Using a Spin Coater Equipped with Semi-Automatic Micropipette and Radiation Heater
〇Kazuki Niita1, Tomoyuki Tobe1,4, Ryoto Funayama3, Naoyuki Shibayama2, Masashi Ikegami1, Tsutomu Miyasaka2 (1.Graduate School of Engineering, Toin University of Yokohama, 2.Faculty of Biomedical Engineering, Toin University of Yokohama, 3.Kishu Giken Kogyo, Co. Ltd., 4.KISTEC)
[18p-P09-28]Development of perovskite solar cells with carbazole dithiocarbamate derivatives.
〇Yuki Miwa1, Tomoki Nishiyama1, Hirotaka Kitoh-Nishioka1, Senku Tanaka1, Takashi Okubo1 (1.Kindai Univ.)
[18p-P09-29]Highly Stable Solar Cells with Large Perovskite Grain and High Crystallinity via Vacuum-Deposited RbI Intercalation Technology
〇(D)Neng Hani Handayani1, Md. Shahiduzzaman1, Munkhtuul Gantumur1, Yue Feng1, Youichi Higashi2, Mayu Nishimoto2, Masahiro Nakano1, Makoto Karakawa1, Jean-Michel Nunzi1, Tetsuya Taima1 (1.Kanazawa Univ., 2.Iwatani Ind.)
[18p-P09-30]In Perovskite Solar Cell Deposition Solvent Extraction of MAPbI3 Layer by Spray Treatment
〇(M1)Kensei Ueyama1, Yusuke Ichino1, Tatsuo Mori1, Noriyuki Taoka1, Taishi Segawa2, Ryosuke Usui2, Keiji Miyachi2, Yoshiyuki Seike1,3 (1.Aichi Inst.Tech, 2.Asahi Sunac, 3.la quaLab)
[18p-P09-31]Sputter processed SnO2 films for perovskite solar cell applications.
〇Chihiro Ogawa1, Itaru Raifuku2, Xianhuan Yu1, Hidenori Kawanishi1, Yukiharu Uraoka1 (1.NAIST, 2.Aoyama Gakuin University)
[18p-P09-32]The Effect of Surface Modification of Electron Transport Layer on the Stability of α-FAPbI3
〇(M2)Ryohei Wada1, Tomoyuki Yamamoto1 (1.Waseda Univ.)
[18p-P09-33]Electron Spin Resonance Study on Charge States in Lead-Based Perovskite Solar Cells with Dopant-Free-Polymer Hole-Transport Layers
〇Yuta Utsumi1, Seira Yamaguchi1,2, Atsushi Sato1,2, Kazuhiro Marumoto1,2,3 (1.Dep. of Mater. Sci., Univ. of Tsukuba, 2.IQSST, Univ. of Tsukuba, 3.TREMS, Univ. of Tsukuba)
[18p-P09-34]Enhanced Carrier Transport in Fluorinated Partially Substituted PTAA Thin Films for Perovskite Solar Cells
〇Masakatsu Sasamoto1, Ryo Isikawa1 (1.Saitama Univ.)
[18p-P09-35]Fabrication of Uniform Perovskite Films on Graphene / 2PACz Composite Films
〇Kosuke Sakano1, Rei Nakaniwa1, Itaru Raifuku1, Shinji Koh1, Yasuaki Ishikawa1 (1.Aoyamagakuin Univ.)
[18p-P09-36]Hole Transport Material 2PACz/Graphene Composite Film for Solar Cell Applications
〇(M2)Rei Nakaniwa1, Kosuke Sakano1, Itaru Raifuku1, Takeshi Watanabe1, Yasuaki Ishikawa1, Shinji Koh1 (1.Aoyama Gakuin Univ.)
[18p-P09-37]Organic-Inorganic Perovskite Solar Cells with a Semitransparent Carbon-Nanotube Thin-Film Top Electrode
〇(M2)Ibuki Watanabe1, Manabu Ishizaki1, Masato Kurihara1 (1.Yamagata Univ.)
[18p-P09-38]Dual Interface Modification on Inorganic Perovskite to Achieve Excellent Stability
〇(DC)Siliang Cao1,2, Md. Abdul Karim1, Shamim Ahmmed1,2, Md. Emrul Kayesh1, Takeaki Sakurai2, Ashraful Islam1 (1.NIMS, 2.Univ. of Tsukuba)
[18p-P09-39]Fabrication of film-type perovskite solar cells using a heat laminator and method for attaching barrier films
〇Riko Tanaka1, Tomoyuki Tobe1,3, Masashi Ikegami1, Tsutomu Miyasaka2 (1.Graduate School of Engineering, Toin University of Yokohama, 2.Faculty of Biomedical Engineering, Toin University of Yokohama, 3.KISTEC)
[18p-P09-40]Fabrication of perovskite solar cell using transparent polyimide film as a base material
〇Takushi Takasuka1,2, Masashi Ikegami2, Tsutomu Miyasaka3 (1.I.S.T Corporation, 2.Guraduate School of Enginering, Toin University of Yokohama, 3.Faculty of Biomedical Engineering, Toin University of Yokohama)
[18p-P09-41]Investigation of Spin-Coating Conditions for Perovskite Layer Preparation on ITO-PET Films Patterned by 355 nm Laser Marker
〇Nao Saito1, Tomoyuki Tobe1,3, Masashi Ikegami1, Tsutomu Miyasaka2,4, Yoshihiko Suda4 (1.Graduate School of Engineering, Toin Univ., 2.Faculty of Biomedical Engineering, Toin Univ., 3.KISTEC, 4.Peccell Technologies, Inc.)
[18p-P09-42]Preparation Conditions of CsFA Perovskite Layer Using a Spin Coater Equipped with Semi-Automatic Micropipette and Radiation Heater
〇Koo Takai1, Tomoyuki Tobe1,3, Masashi Ikegami1, Tsutomu Miyasaka2 (1.Graduate School of Engineering, Toin Univ, 2.Faculty of Biomedical Engineering, Toin Univ, 3.KISTEC)
[18p-P09-43]P2 scribing of perovskite solar cells with 515 nm pulsed laser – comparison of pulse duration effect in the nano to femtosecond range –
〇Masaki Yumoto1, Kenichi Tashiro1, Hideyuki Takada1, Kohei Yamamoto1, Daniela Serien1, Takurou Murakami1, Aiko Narazaki1 (1.AIST)
[18p-P09-44]Study of ITO deposition for Perovskite/Si tandem solar cells
〇Rin Kawanabe1, Ryotaro Fujita1, Yudai Kikuchi1, Keito Hisatsune1, Shinsuke Miyajima2, Takurou Murakami3, Atsushi Kogo3, Shiro Uchida1 (1.Chiba Inst., 2.Tokyo Tech., 3.AIST)
[18p-P09-45]Time Resolved Analysis of Photoelectric Conversion Process in Perovskite Solar Cell with Light Synchronized Time Domain ReflectometryⅡ
〇Ryuichi Tokuyama1, Haruki Nakashima1, Shintaro Fujii1, Yuto Ishimatsu1, Ruoxue Zhang1, Tomoaki Mashiko1, Sou Kuromasa1, Ryuya Inakawa1, Takeru Tsuchihashi1, Rikuto Matsumoto1, Tatsuya Omori1, Masatoshi Sakai1, Hirofumi Mino1 (1.Chiba Univ.)
[18p-P09-46]Giant dielectric constants of perovskite solar cells observed by dielectric spectroscopy
Taiyo Asada1, Kento Horikawa1, Kunihiro Watanabe1, 〇Hiroyoshi Naito1,2,3 (1.Osaka Metro. Univ., 2.RIMED, 3.Ritsumeikan RISA)
[18p-P09-47]Electronic transport properties of perovskite solar cells studied by modulation spectroscopies
Takashi Hirokawa1, Takashi Kobayashi1,2, Takashi Nagase1,2, 〇Hiroyoshi Naito1,2,3 (1.Osaka Metro. Univ., 2.RIMED, 3.Ritsumeikan RISA)
[18p-P09-48]Characterization of Indoor Perovskite Solar Cells by 2-Dimensional Device Simulation
〇Ibuki Matsugae1, Dong Nguyen1, Itaru Raifuku1, Yasuaki Ishikawa1 (1.Aoyama Gakuin Univ.)
[18p-P09-49]Durability Testing Method of Perovskite Solar Cells Using MPPT Technique Employing Current Smoothing Algorithm Based on Least Squares Method
〇Tenshi Tamura1, Tomoyuki Tobe1,3,2, Naoyuki Shibayama2, Masashi Ikegami1, Tsutomu Miyasaka2 (1.Graduate School of Engineering, Toin University of Yokohama, 2.Faculty of Biomedical Engineering, Toin University of Yokohama, 3.KISTEC)
[18p-P09-50]Investigation of Degradation Factors in Perovskite Solar Cells Under High Intensity Monochromatic LED Light
〇Tomoyuki Tobe1,2, Naoyuki Shibayama3, Masashi Ikegami1, Tsutomu Miyasaka3 (1.Graduate School of Engineering Toin University of Yokohama, 2.Kanagawa Institute of Industrial Science and Technology, 3.Faculty of Biomedical Engineering Toin University of Yokohama)
[18p-P09-51]Degradation mechanism of perovskite solar cells by application of DC voltage
〇Ryo Ishizuka1, Ryo Washiashi1, Itaru Raifuku1, Yasuaki Ishikawa1 (1.Aoyama Gakuin Univ.)
[18p-P09-52]Soft X-ray Tolerance of an FAPbI3 Perovskite Film With Dopamine Hydrochloride
〇(M2)Ryosuke Suematsu1,2, Hiroaki Jinno2, Daisuke Kobayashi2, Kazuyuki Hirose2, Naoyuki Shibayama3, Masashi Ikegami3, Tsutomu Miyasaka3, Tomoyuki Yamamoto1 (1.Waseda Univ., 2.ISAS/JAXA, 3.Toin Univ. of Yokohama)
[18p-P09-53]Fundamental Research on Establishing a Perovskite Raw Material Recovery Method Using Ultrasonic Homogenizer
〇Mii Ishida1, Nao Saito1, Tomoyuki Tobe1,3, Masashi Ikegami1, Tsutomu Miyasaka2,4, Yoshihiko Suda4 (1.Graduate School of Engineering, Toin Univ., 2.Faculty of Biomedical Engineering, Toin Univ., 3.KISTEC, 4.Peccell Technologies, Inc.)
[18p-P09-54]Photocatalytic hydrogen generation using perovskite compounds (III) -Hydrogen generation using perovskite thin films-
〇(M2C)Keita Matsumi1, Masahiro Fujita1, Masahiro Rikukawa1, Yuko Takeoka1 (1.Sophia Univ.)